Single Gas
A portable gas monitor is a device which is used for personal protection and may be worn on the body or held in your hand for the detection of a particular type of gas. As there are many detectable gases there are also many instruments which may be used to detect these gases. While it may be that you are familiar with a particular style of instrument we do recommend that you consult one of our team to be sure that your choice is suitable for the application. It is also important to have an understanding of which gases you may be in contact with. When we QA a unit we are able to calibrate the combustible sensor for different gases such as Butane, Methane, Hexane etc. The readings will be very different depending on the type of gas being detected.
 |
03 Series GP-03 Single Gas Detector LELThe 03 Series can provide protection at an affordable price. The GP‐03 is a personal single gas monitor, designed for protection from exposure to combustible hydrocarbons (LEL). Continue reading “03 Series GP-03 Single Gas Detector LEL” » |
 |
Portable Fumigation Gas Leak CheckerThe SP-220 Fumigation Series is a Portable Gas Leak Checker designed to easily check for Fumigation Gas Leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Fumigation. |
|
Portable Super Toxic / Combustible / Freon Gas Leak CheckerThe SP-220 SC Series is a Portable Gas Leak Checker designed to easily check for Super Toxic, Combustible and Freon Gas leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks. Continue reading “Portable Super Toxic / Combustible / Freon Gas Leak Checker” » |
 |
Optical Gas IndicatorThe Control Equipment Gas Indicator Model FI‐8000 is a precision gas analyser which is adapted to measure the % volume concentration of any of the commonly used gas in a mixture of air or oxygen for fumigation or anesthetic gas. |
 |
Compact Portable Laser Methane Gas DetectorPortable and handheld the LaserMethane mini Green (LMm) offer users the ability to detect methane at distance. What once was a time consuming and resource draining procedure can now be completed in a fraction of the time by utilising the best in Tunable Diode Laser Absorption Spectroscopy (TDLAS). Continue reading “Compact Portable Laser Methane Gas Detector” » |
 |
Intrinsic Safety Compact Portable Methane Gas DetectorThe new Laser Methane mini (LMm) is capable of remotely detecting methane and other gases containing methane (natural gas or similar). It can quickly detect gas leaks or accumulated gas from a remote place by pointing a laser beam at the target, and is even able to detect a leak through glass. Continue reading “Intrinsic Safety Compact Portable Methane Gas Detector” » |
 |
O2 Portable Single Gas MonitorThe GX-8000 Series sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications. |
|
LEL Portable Single Gas MonitorThe GX-8000 Series sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications. |
 |
Single Toxic Gas MonitorWith its large LCD display the readings on the SC-8000 are visible even if the operator is wearing a Hazmat suit. For loud environments the unit is equipped with a 95dB alarm together with three bright LED lamps, making alarm conditions both audible and visible in any situation. The unit is also designed to be waterproof, thus making the SC-8000 extremely rugged in any setting. |
 |
Portable Formaldehyde Gas DetectorThe Portable Formaldehyde Gas Detector Model FP-31 is a precision gas analyser which measures gases in the ppm range using photoelectric photometry method with chlorimetric detection tabs. |
Multi Gas
A portable gas monitor is a device which is used for personal protection and may be worn on the body or held in your hand for the detection of a particular type of gas. As there are many detectable gases there are also many instruments which may be used to detect these gases. While it may be that you are familiar with a particular style of instrument we do recommend that you consult one of our team to be sure that your choice is suitable for the application. It is also important to have an understanding of which gases you may be in contact with. When we QA a unit we are able to calibrate the combustible sensor for different gases such as Butane, Methane, Hexane etc. The readings will be very different depending on the type of gas being detected.
 |
Portable One to Five Gas MonitorThe GX-2012 is the newest state-of-the-art Gas Detector in the Control Equipment arsenal and our smallest personal 5 sensor gas monitor with a built-in sample pump. Specially designed for the LNG / Pipeline industry in Australia, the GX-2012 fills the need for a monitor with the dual capabilities of two operating modes: Normal (for confined space) and Bar Hole. |
 |
Handheld One to Six Gas Personal DetectorThe GX-6000 – the long awaited 6 gas personal monitor is finally here. This instrument is the lightest and smallest 6 gas monitor created, weighing in at only 600 grams with the rubber boot and all. Check out the brochure today and give one of our sales technicians a call to find out more! Continue reading “Handheld One to Six Gas Personal Detector” » |
 |
One to Six Gas Portable MonitorThe Eagle 2 is equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection. One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases. |
 |
Four Gas Portable MonitorThe GX-8000 sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications. |
 |
Portable Infrared Monitor & Multi Gas DetectorDesigned with LNG and Crude Oil Tankers in mind these sample draw instruments are able to detect both dual and unique combinations of gas found on these vessels. They are even able to detect gas levels in N2 and Inert environments. Continue reading “Portable Infrared Monitor & Multi Gas Detector” » |
 |
Portable Infrared MonitorDesigned with LNG and Crude Oil Tankers in mind these sample draw instruments are able to detect both dual and unique combinations of gas found on these vessels. They are even able to detect gas levels in N2 and Inert environments. |
Fixed Gas Detection
A fixed gas system is one which is used for protection of set areas or product as well as for personal protection. A fixed system is monitored 24/7 and normally reports back into a “Building Management System” so that in the event of an alarm a protocol is followed to avoid any serious events. The sensors may be mounted in the hazardous areas (diffusion) or outside the area with the use of a pump system (sample-draw), both of these then take a signal back to a controller or BMS to indicate the sensor readings. In the event of a power failure we recommend a battery back up be installed with a Fixed System to ensure protection is constant during any power failures. A portable gas monitor should always be on stand by where a fixed system is installed in the event of a failed sensor.
Controllers
 |
Single Channel Gas Detection ControllerThe Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. An external reset switch allows the alarm to be silenced from outside of the controller housing. Continue reading “Single Channel Gas Detection Controller” » |
 |
2 Channel Wall Mount Gas Detection ControllerThis low cost fixed system controller is designed to accept up to two points of gas detection. It is capable of connecting directly to a variety of gas sensors. The Beacon 200 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC). Continue reading “2 Channel Wall Mount Gas Detection Controller” » |
 |
4 Channel Wall Mount Gas Detection ControllerThe Beacon 410 is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection. Continue reading “4 Channel Wall Mount Gas Detection Controller” » |
 |
8 Channel Wall Mount Gas Detection ControllerThe Beacon 800 is a versatile, low cost fixed system controller for one to eight points of gas detection. The 2 large digital displays have backlighting and easily identify both the gas type and the gas concentration for all 8 channels simultaneously. Continue reading “8 Channel Wall Mount Gas Detection Controller” » |
Sensors
 |
Oxygen SensorIdeally suited for Laboratory environments, the Oxygen Sensor has been designed to be used in conjunction with a Beacon Controller. Matched with a Siren and Strobe the O2 system can be used as a stand alone system or BMS System. |
 |
Economy Carbon Monoxide SensorControl Equipment now offers a very cost effective solution for Carbon Monoxide Exhaust Emission Monitoring and Exhaust Fan Control for enclosed carparks and similar applications. |
 |
Carbon Monoxide Carpark SensorThis Carbon Monoxide transmitter is designed purely for the Car Park Market. Highly reliable, with a life of 3 to 5 years, this transmitter is a very cost effective 4-20 mA transmitter for the detection of carbon monoxide gases. |
 |
Wall Mounted Economy Carbon Dioxide SensorVentilation control by CO2 is a viable and energy efficient way of controlling ventilation to target cfm / person levels based on actual occupancy. The measurable rather than traditional approach of providing fixed ventilation is based on maximum occupancy. Continue reading “Wall Mounted Economy Carbon Dioxide Sensor” » |
 |
Free Standing Economy Carbon Dioxide SensorThe T99-CO2D Carbon Dioxide sensor is designed to be installed in HVAC applications. The CO2 sensing element uses Non-Dispersive Infrared technology (NDIR) with up to 15 years lifetime. Continue reading “Free Standing Economy Carbon Dioxide Sensor” » |
 |
H2S SensorThis highly reliable, cost effective Hydrogen Sulphide sensor, amplifier and enclosure is designed to fit into any current controller or BMS system. Used mainly in the Sewerage treatment industry the H2S sensor has proven itself as a robust unit. |
 |
Combustible Gas Sensor KitThe KR61-0203-02RKTR Sensor configuration consist of a 3-wire sensor, amplifier and enclosure with terminal strips. The Combustible Gas Sensor type KR61-0203-02RKTR, for diffusion sensing, is highly reliable and designed to give extended service. |
 |
Stand Alone Visibility Gas Monitor for TunnelsBuilt with a “stand alone” capability), the NOVICOM is a single sensor solution for measuring CO, NO and visibility in road |
 |
Direction Model for TunnelsAIRFLOW offers a rugged, non-contact solution for the universal requirement to monitor air velocity and direction in any tunnel application. AIRFLOW is a low cost, low maintenance solution that is ideally suited to tunnel environments. |
 |
Visibility Monitor for TunnelsWith low cost of ownership and minimal maintenance required the VCOM is a robust unit that satisfies the common requirement for a single sensor solution for monitoring both Carbon Monoxide and visibility in road tunnels. |
|
Visibility Monitor for TunnelsVIPA MkII provides a dependable solution to the requirement for stand alone visibility monitoring in the tunnel environment. The instrument consists of a transmitter head and receiver head mounted 6m apart on the tunnel wall or ceiling. |
 |
Tunnel Illuminance PhotometerDesigned specifically for the tunnel environment, the ILLIOS measures the level of illuminance within the tunnel bore to ensure interior illumination levels are being continuously maintained in order to ensure safe lighting conditions for drivers. |
 |
Wireless / Fixed Gas Detection SystemThe OI-6000 Sensor Assembly is an innovative wireless gas detection system designed to monitor gas in hostile environments without the use of wires or conduit from the controller to the sensor. |
All In One
 |
Toxic Smart SensorThe new Model GD-70D smart gas detection transmitter series sets a new standard for performance, flexibility, and versatility. The long life high capacity pump and wide variety of sensing elements are replaceable in a few seconds, with no tools required. |
 |
Digester Gas MonitorGas from waste digesters contains high levels of methane, CO2, and H2S, and little to no oxygen present. The Control Equipment Digester Gas Monitor checks for all these gases on a cyclic basis, pulling samples from up to 30 metres away. |
 |
Stand Alone TransmitterThe M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. It utilises a magnetic wand technique for performing non-intrusive calibration. |
 |
Smart Transmitter DetectorOur SD-1 line of smart transmitters feature state-of-the-art gas detectors with durable flameproof enclosure, maximum safety, especially in hydrogen/ acethylene atmospheres. |
 |
Smart Transmitter / Infrared Gas DetectorWith a visual display the Model SD-805 series smart transmitter/detector heads are state of the art instruments housed in a flameproof enclosure – ideal for Intrinsically Safe Applications. Continue reading “Smart Transmitter / Infrared Gas Detector” » |
Contact Control Equipment
Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.