The Model OX-600 is an indoor, stand alone oxygen monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as oxygen levels reach each alarm level.
Stand Alone Oxygen Monitor Features:
The Model OX-600 is an indoor, stand alone monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as oxygen levels reach each alarm level. The OX-600 has 2 preset alarms, and comes ready to operate with a simple wall mount bracket. It is capable of operating with two different power options; 24 VDC or alkaline batteries. If on alarm, the user is notified by an audible alarm tone and the multicoloured LED digital display.
The OX-600 uses a galvanic cell sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. Additional alarms and strobes may be integrated into the monitor. It can also be wired into a BMS (building management system) if required.
| Detection Principle | Galvanic cell |
| Gas Detected | Oxygen (O2) |
| Detection Range | 0 ~ 25 vol% |
| Display Resolution | 0.1 vol% |
| Sampling Method | Diffusion or remote sampling method with optional sensor extender cable |
| Indication Accuracy* | Within ±0.7 vol% |
| Response Time* | 90% Response within 30 seconds (T90) |
| Alarm Levels | Two preset alarms (L-LL), alarm 1 = 19.5% vol, alarm 2 = 18.0% vol |
| Display of Alarm | 1st gas alarm: gas concentration reading blinks or orange light, flashing AL1 light or orange light, buzzer 2nd gas alarm: gas concentration reading blinks or red light, flashing AL2 light or red light, buzzer |
| Alarm Logic | Latching or Non-latching (including trouble alarm) |
| Alarm Contact | Dry contact, Form A or Form B, Form A standard Factory Setting, normally open (closed in ALARM) |
| Display | Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation) |
| Trouble Alarm / Self-Diagnosis | System trouble / sensor connection trouble |
| Display of Trouble Alarm | Buzzer / flashing of red error message |
| Relay Contact Rating | 125VAC, 1A or 30VDC, 1A (Resistive load) |
| Output Signal | 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0 – 1VDC (Non-isolated) *only for 0 – 1VDC Alkaline battery specification |
| Extender Cable | Extender cable with remote box (3m, 5m, 10m or 20m lengths available) |
| Power Sources | 24VDC±10%, or AA alkaline battery (2 each) |
| Power Consumption | AC specification: MAX 3.5VA, DC specification: MAX 2W |
| Continuous Operation (for Alkaline Battery version) | 1 year (no alarm, no indication) for alkaline battery option |
| Operating Temperature | -17°C ~ 40°C |
| Operating Humidity | 0 – 90%RH (non-condensing) |
| Mounting Equipment | Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side |
| Dimension | Body: approx. 80mm (W) x 120mm (H) x 35.5mm (D) |
| Weight | DC specification: approx. 180g, Alkaline battery specification: approx. 230g |
OX-600 Alarm Operation
The Model OX-600 is an indoor, stand alone monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as oxygen levels reach each alarm level. The OX-600 has 2 preset alarms, and comes ready to operate with a simple wall mount bracket. It is capable of operating with two different power options; 24 VDC or alkaline batteries. If on alarm, the user is notified by an audible alarm tone and the multicoloured LED digital display.
The OX-600 uses a galvanic cell sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. Additional alarms and strobes may be integrated into the monitor. It can also be wired into a BMS (building management system) if required.
| Detection Principle | Galvanic cell |
| Gas Detected | Oxygen (O2) |
| Detection Range | 0 ~ 25 vol% |
| Display Resolution | 0.1 vol% |
| Sampling Method | Diffusion or remote sampling method with optional sensor extender cable |
| Indication Accuracy* | Within ±0.7 vol% |
| Response Time* | 90% Response within 30 seconds (T90) |
| Alarm Levels | Two preset alarms (L-LL), alarm 1 = 19.5% vol, alarm 2 = 18.0% vol |
| Display of Alarm | 1st gas alarm: gas concentration reading blinks or orange light, flashing AL1 light or orange light, buzzer 2nd gas alarm: gas concentration reading blinks or red light, flashing AL2 light or red light, buzzer |
| Alarm Logic | Latching or Non-latching (including trouble alarm) |
| Alarm Contact | Dry contact, Form A or Form B, Form A standard Factory Setting, normally open (closed in ALARM) |
| Display | Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation) |
| Trouble Alarm / Self-Diagnosis | System trouble / sensor connection trouble |
| Display of Trouble Alarm | Buzzer / flashing of red error message |
| Relay Contact Rating | 125VAC, 1A or 30VDC, 1A (Resistive load) |
| Output Signal | 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0 – 1VDC (Non-isolated) *only for 0 – 1VDC Alkaline battery specification |
| Extender Cable | Extender cable with remote box (3m, 5m, 10m or 20m lengths available) |
| Power Sources | 24VDC±10%, or AA alkaline battery (2 each) |
| Power Consumption | AC specification: MAX 3.5VA, DC specification: MAX 2W |
| Continuous Operation (for Alkaline Battery version) | 1 year (no alarm, no indication) for alkaline battery option |
| Operating Temperature | -17°C ~ 40°C |
| Operating Humidity | 0 – 90%RH (non-condensing) |
| Mounting Equipment | Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side |
| Dimension | Body: approx. 80mm (W) x 120mm (H) x 35.5mm (D) |
| Weight | DC specification: approx. 180g, Alkaline battery specification: approx. 230g |
OX-600 Alarm Operation