Stand Alone Carbon Monoxide Sensor
The model EC-600 is an indoor, standalone monitor that detects Carbon Monoxide (CO). Its’s Sleek, low-profile design is equipped with a unique tri-colour display. The EC-600 uses a fast responding low-cost plug-in style electrochemical sensor.
Stand Alone Oxygen Sensor
The model OX-600 is an indoor, standalone monitor that detects Oxygen (O2). Its’s Sleek, low-profile design is equipped with a unique tri-colour display. The OX-600 uses a fast responding low-cost plug-in style electrochemical sensor.
Stand Alone Carbon Dioxide Sensor
The model RI-600 is an indoor, standalone monitor that detects Carbon Dioxide (CO2). Its’s Sleek, low-profile design is equipped with a unique tri-colour display. The RI-600 uses a fast responding low-cost plug-in style electrochemical sensor.
Carbon Monoxide Sensor for Small to Medium Car Parks
Control Equipment now offers a very cost effective solution for Carbon Monoxide Exhaust Emission Monitoring and Exhaust Fan Control for enclosed carparks and similar applications.
Carbon Monoxide Sensor for Large Car Parks
This Carbon Monoxide transmitter is designed purely for the Car Park Market and as such is a highly reliable and very cost effective 4-20 mA transmitter for the detection of carbon monoxide gases. The large electrochemical cell are designed for long life and typically last 3 – 5 years.
Wall Mounted Carbon Dioxide Sensor
Ventilation control by CO2 is a viable and energy efficient way of controlling ventilation to target cfm / person levels based on actual occupancy. The measurable rather than traditional approach of providing fixed ventilation is based on maximum occupancy.
Duct Mounted Carbon Dioxide Sensor
The DUCT Mounted Carbon Dioxide sensor is designed to be installed in HVAC applications where the CO2 sensing element uses Non-Dispersive Infrared technology (NDIR) with the patented self-calibration system to guarantee long-term stability and up to 15 years lifetime.
Refrigerant Gas Twin Beam Infrared Sensor
Refrigerant gas transmitter with two-beam infrared sensor for the continuous monitoring of the ambient air to detect hydrochlorofluorocarbon (HCFC) and hydrofluorocarbon (HFC) refrigerants. The infrared measuring method with integrated temperature and drift compensation stands for highest accuracy, selectivity and reliability despite of the calibration interval of 3 years. The ADT-D3 possesses a standard analog output (0) 4- 20 mA or (0) 2– 10 V DC, and an RS-485 interface. 2 relays with adjustable switching thresholds as well as an integrated display are available as options.
Refrigerant Semi-Conductor Sensor
Refrigerant gas transmitter with semi-conductor sensor for monitoring leakages of cooling agents like HFC (hydrofluorocarbon) or HCFC (hydrochlorofluorocarbon). The semi-conductor typical, non-linear signal is translated into a linear, temperature-compensated output signal. A comfortable calibration routine with selective access release is integrated in the transmitter. The ADT-43 possesses a standard analogue output (0) 4- 20 mA or (0) 2– 10 V DC, and an RS-485 interface. 2 relays with adjustable switching thresholds are available as an option.
Ideally suited for laboratory environments, the oxygen sensor has been designed to be used in conjunction with a beacon controller. Matched with a siren and strobe the O2 system can be used as a stand alone system or BMS System.
Single Channel Gas Detection Controller
The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. An external reset switch allows the alarm to be silenced from outside of the controller housing.
Two Channel Mount Gas Detection Controller
This low cost fixed system controller is designed to accept up to two points of gas detection. It is capable of connecting directly to a variety of gas sensors. The Beacon 200 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC).
Four Channel Wall Mount Gas Detection Controller
The Beacon 410 is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection. A digital Modbus interface for remote logging of data via a Modbus network comes standard.
8 Channel Wall Mount Gas Detection Controller
The Beacon 800 is a versatile, low cost fixed system controller for one to eight points of gas detection. The 2 large digital displays have backlighting and easily identify both the gas type and the gas concentration for all 8 channels simultaneously.