Single Gas

A portable gas monitor is a device which is used for personal protection and may be worn on the body or held in your hand for the detection of a particular type of gas. As there are many detectable gases there are also many instruments which may be used to detect these gases. While it may be that you are familiar with a particular style of instrument we do recommend that you consult one of our team to be sure that your choice is suitable for the application. It is also important to have an understanding of which gases you may be in contact with. When we QA a unit we are able to calibrate the combustible sensor for different gases such as Butane, Methane, Hexane etc. The readings will be very different depending on the type of gas being detected.

03 Series GP-03

03 Series GP-03 Single Gas Detector LEL

The 03 Series can provide protection at an affordable price. The GP‐03 is a personal single gas monitor, designed for protection from exposure to combustible hydrocarbons (LEL).

Continue reading “03 Series GP-03 Single Gas Detector LEL” »

SP-220

Portable Fumigation Gas Leak Checker

The SP-220 Fumigation Series is a Portable Gas Leak Checker designed to easily check for Fumigation Gas Leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Fumigation.

Continue reading “Portable Fumigation Gas Leak Checker” »

SP-220

Portable Super Toxic / Combustible / Freon Gas Leak Checker

The SP-220 SC Series is a Portable Gas Leak Checker designed to easily check for Super Toxic, Combustible and Freon Gas leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Super Toxic, Combustible and Freon Gas Leaks.

Continue reading “Portable Super Toxic / Combustible / Freon Gas Leak Checker” »

fi-8000_clear

Optical Gas Indicator

The Control Equipment Gas Indicator Model FI‐8000 is a precision gas analyser which is adapted to measure the % volume concentration of any of the commonly used gas in a mixture of air or oxygen for fumigation or anesthetic gas.

Continue reading “Optical Gas Indicator” »

Laser-Methane-Mini-LMm-SA3C32A

Compact Portable Laser Methane Gas Detector

Portable and handheld the LaserMethane mini Green (LMm) offer users the ability to detect methane at distance. What once was a time consuming and resource draining procedure can now be completed in a fraction of the time by utilising the best in Tunable Diode Laser Absorption Spectroscopy (TDLAS).

Continue reading “Compact Portable Laser Methane Gas Detector” »

LMMG_clear_bright green

Intrinsic Safety Compact Portable Methane Gas Detector

The new Laser Methane mini (LMm) is capable of remotely detecting methane and other gases containing methane (natural gas or similar). It can quickly detect gas leaks or accumulated gas from a remote place by pointing a laser beam at the target, and is even able to detect a leak through glass.

Continue reading “Intrinsic Safety Compact Portable Methane Gas Detector” »

gx-8000_clear

O2 Portable Single Gas Monitor

The GX-8000 Series sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.

Continue reading “O2 Portable Single Gas Monitor” »

gx-8000_clear

LEL Portable Single Gas Monitor

The GX-8000 Series sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.

Continue reading “LEL Portable Single Gas Monitor” »

SC-8000

Single Toxic Gas Monitor

With its large LCD display the readings on the SC-8000 are visible even if the operator is wearing a Hazmat suit.  For loud environments the unit is equipped with a 95dB alarm together with three bright LED lamps, making alarm conditions both audible and visible in any situation.  The unit is also designed to be waterproof, thus making the SC-8000 extremely rugged in any setting.

Continue reading “Single Toxic Gas Monitor” »

FP-31

Portable Formaldehyde Gas Detector

The Portable Formaldehyde Gas Detector Model FP-31 is a precision gas analyser which measures gases in the ppm range using photoelectric photometry method with chlorimetric detection tabs.

Continue reading “Portable Formaldehyde Gas Detector” »

Multi Gas

A portable gas monitor is a device which is used for personal protection and may be worn on the body or held in your hand for the detection of a particular type of gas. As there are many detectable gases there are also many instruments which may be used to detect these gases. While it may be that you are familiar with a particular style of instrument we do recommend that you consult one of our team to be sure that your choice is suitable for the application. It is also important to have an understanding of which gases you may be in contact with. When we QA a unit we are able to calibrate the combustible sensor for different gases such as Butane, Methane, Hexane etc. The readings will be very different depending on the type of gas being detected.

GX-2012_large

Portable One to Five Gas Monitor

The GX-2012 is the newest state-of-the-art Gas Detector in the Control Equipment arsenal and our smallest personal 5 sensor gas monitor with a built-in sample pump.  Specially designed for the LNG / Pipeline industry in Australia, the GX-2012 fills the need for a monitor with the dual capabilities of two operating modes: Normal (for confined space) and Bar Hole.

Continue reading “Portable One to Five Gas Monitor” »

GX-6000_clear

Handheld One to Six Gas Personal Detector

The GX-6000 – the long awaited 6 gas personal monitor is finally here. This instrument is the lightest and smallest 6 gas monitor created, weighing in at only 600 grams with the rubber boot and all. Check out the brochure today and give one of our sales technicians a call to find out more!

Continue reading “Handheld One to Six Gas Personal Detector” »

eagle 2 fumigation

One to Six Gas Portable Monitor

The Eagle 2 is equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection.  One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases.

Continue reading “One to Six Gas Portable Monitor” »

GX-8000--- clear

Four Gas Portable Monitor

The GX-8000 sets the new industry standard for rugged, reliable portable gas detection. Its tough, water proof design utilises features based on years of gas detection design experience, to assure that the instrument will operate properly to protect workers and property in all kinds of harsh gas detection applications.

Continue reading “Four Gas Portable Monitor” »

rx517

Portable Infrared Monitor & Multi Gas Detector

Designed with LNG and Crude Oil Tankers in mind these sample draw instruments are able to detect both dual and unique combinations of gas found on these vessels.  They are even able to detect gas levels in N2 and Inert environments.

Continue reading “Portable Infrared Monitor & Multi Gas Detector” »

RX-515_clear

Portable Infrared Monitor

Designed with LNG and Crude Oil Tankers in mind these sample draw instruments are able to detect both dual and unique combinations of gas found on these vessels.  They are even able to detect gas levels in N2 and Inert environments.

Continue reading “Portable Infrared Monitor” »

Fixed Gas Detection

KNPC

A fixed gas system is one which is used for protection of set areas or product as well as for personal protection. A fixed system is monitored 24/7 and normally reports back into a “Building Management System” so that in the event of an alarm a protocol is followed to avoid any serious events. The sensors may be mounted in the hazardous areas (diffusion) or outside the area with the use of a pump system (sample-draw), both of these then take a signal back to a controller or BMS to indicate the sensor readings. In the event of a power failure we recommend a battery back up be installed with a Fixed System to ensure protection is constant during any power failures. A portable gas monitor should always be on stand by where a fixed system is installed in the event of a failed sensor.

Controllers

wwrki-beacon-110-01_clear

Single Channel Gas Detection Controller

The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection.  An external reset switch allows the alarm to be silenced from outside of the controller housing.

Continue reading “Single Channel Gas Detection Controller” »

wwrki-beacon-200-01_clear

2 Channel Wall Mount Gas Detection Controller

This low cost fixed system controller is designed to accept up to two points of gas detection. It is capable of connecting directly to a variety of gas sensors. The Beacon 200 can also accept any 4-20 mA transmitter (2 or 3 wire, 24 VDC).

Continue reading “2 Channel Wall Mount Gas Detection Controller” »

beacon-410_clearpng

4 Channel Wall Mount Gas Detection Controller

The Beacon 410 is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection.

Continue reading “4 Channel Wall Mount Gas Detection Controller” »

beacon 800

8 Channel Wall Mount Gas Detection Controller

The Beacon 800 is a versatile, low cost fixed system controller for one to eight points of gas detection.  The 2 large digital displays have backlighting and easily identify both the gas type and the gas concentration for all 8 channels simultaneously.

Continue reading “8 Channel Wall Mount Gas Detection Controller” »

 Sensors

R65-2504RK-C_v2

Oxygen Sensor

Ideally suited for Laboratory environments, the Oxygen Sensor has been designed to be used in conjunction with a Beacon Controller.  Matched with a Siren and Strobe the O2 system can be used as a stand alone system or BMS System.

Continue reading “Oxygen Sensor” »

R99 CMD

Economy Carbon Monoxide Sensor

Control Equipment now offers a very cost effective solution for Carbon Monoxide Exhaust Emission Monitoring and Exhaust Fan Control for enclosed carparks and similar applications.

Continue reading “Economy Carbon Monoxide Sensor” »

R99-2003 sensor 2

Carbon Monoxide Carpark Sensor

This Carbon Monoxide transmitter is designed purely for the Car Park Market.  Highly reliable, with a life of 3 to 5 years, this transmitter is a very cost effective 4-20 mA transmitter for the detection of carbon monoxide gases.

Continue reading “Carbon Monoxide Carpark Sensor” »

 T99 CO2w sensor

Wall Mounted Economy Carbon Dioxide Sensor

Ventilation control by CO2 is a viable and energy efficient way of controlling ventilation to target cfm / person levels based on actual occupancy.  The measurable rather than traditional approach of providing fixed ventilation is based on maximum occupancy.

Continue reading “Wall Mounted Economy Carbon Dioxide Sensor” »

 T99 CO2D

Free Standing Economy Carbon Dioxide Sensor

The T99-CO2D Carbon Dioxide sensor is designed to be installed in HVAC applications.  The CO2 sensing element uses Non-Dispersive Infrared technology (NDIR) with up to  15 years lifetime.

Continue reading “Free Standing Economy Carbon Dioxide Sensor” »

R65-2424rk c

H2S Sensor

This highly reliable, cost effective Hydrogen Sulphide sensor, amplifier and enclosure is designed to fit into any current controller or BMS system.  Used mainly in the Sewerage treatment industry the H2S sensor has proven itself as a robust unit.

Continue reading “H2S Sensor” »

R61-0203-02RKTR copy

Combustible Gas Sensor Kit

The KR61-0203-02RKTR Sensor configuration consist of a 3-wire sensor, amplifier and enclosure with terminal strips. The Combustible Gas Sensor type KR61-0203-02RKTR, for diffusion sensing, is highly reliable and designed to give extended service.

Continue reading “Combustible Gas Sensor Kit” »

Vipa_clear

Stand Alone Visibility Gas Monitor for Tunnels

Built with a “stand alone” capability), the NOVICOM is a single sensor solution for measuring CO, NO and visibility in road
tunnels. Designed specifically for the requirements of tunnel operators, NOVICOM is low cost with minimal maintenance requirements.

Continue reading “Visibility Gas Monitor for Tunnels” »

Airflow new_clear

Direction Model for Tunnels

AIRFLOW offers a rugged, non-contact solution for the universal requirement to monitor air velocity and direction in any tunnel application.  AIRFLOW is a low cost, low maintenance solution that is ideally suited to tunnel environments.

Continue reading “Direction Model for Tunnels” »

VICONOX-1_web-300x158_clear

Visibility Monitor for Tunnels

With low cost of ownership and minimal maintenance required the VCOM is a robust unit that satisfies the common requirement for a single sensor solution for monitoring both Carbon Monoxide and visibility in road tunnels.

Continue reading “Visibility Monitor for Tunnels” »

Vipa_clear

Visibility Monitor for Tunnels

VIPA MkII provides a dependable solution to the requirement for stand alone visibility monitoring in the tunnel environment.  The instrument consists of a transmitter head  and receiver head mounted 6m apart on the tunnel wall or ceiling.

Continue reading “Visibility Monitor for Tunnels” »

Illios_clear

Tunnel Illuminance Photometer

Designed specifically for the tunnel environment, the ILLIOS measures the level of illuminance within the tunnel bore to ensure interior illumination levels are being continuously maintained in order to ensure safe lighting conditions for drivers.

Continue reading “Tunnel Illuminance Photometer” »

OI-6000---small-for-web---1072014

Wireless / Fixed Gas Detection System

The OI-6000 Sensor Assembly is an innovative wireless gas detection system designed to monitor gas in hostile environments without the use of wires or conduit from the controller to the sensor.

Continue reading “Wireless / Fixed Gas Detection System” »

 All In One

Digester-Apirator-large_clear

Digester Gas Monitor

Gas from waste digesters contains high levels of methane, CO2, and H2S, and little to no oxygen present. The Control Equipment Digester Gas Monitor checks for all these gases on a cyclic basis, pulling samples from up to 30 metres away.

Continue reading “Digester Gas Monitor” »

m2a_clear_NEW

Stand Alone Transmitter

The M2A™ is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. It utilises a magnetic wand technique for performing non-intrusive calibration.

Continue reading “Stand Alone Transmitter” »

SD-1 copy 1

Smart Transmitter Detector

Our SD-1 line of smart transmitters feature state-of-the-art gas detectors with durable flameproof enclosure, maximum safety, especially in hydrogen/ acethylene atmospheres.

Continue reading “SD-1 Series” »

SD-805

Smart Transmitter / Infrared Gas Detector

With a visual display the Model SD-805 series smart transmitter/detector heads are state of the art instruments housed in a flameproof enclosure – ideal for Intrinsically Safe Applications.

Continue reading “Smart Transmitter / Infrared Gas Detector” »

Contact Control Equipment

Submit an email enquiry or give us a call on 1 800 174 536 and we will answer any questions that you may have.