Personal Gas Detection Calibrator – SDM-6000

Personal Gas Detection Calibrator - SDM-6000

Features:

  • Stand-alone station (no PC Required)
  • Modular design
  • Charging
  • Calibration
  • Bump Test
  • Save Bump Test and Calibration records
  • Bump test and calibration records copy to USB jump drive
  • Includes PC software for viewing/archiving bump test and calibration records

Application/s:

  • Personal monitoring
  • Refineries/petrochemical
  • Wastewater treatment / confined space
  • Utilities
  • Chemical plants
  • Hazardous material
  • Water
  • Fire service

Overview of the SDM-6000 Personal Gas Detection Calibrator

Versatile

The SDM-6000 is a versatile Personal Gas Detection Calibrator maintenance tool that automates the bump test/calibration of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).

Modular Design

SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data.

Automated Routines

Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralised in one network location accessible by anyone with the PC Controlled software with access to the network location.

Specifications:

Display Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light
LED 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking
BUMP test Standard setting values

AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec

Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON

Auto print: OFF

Setting range

AIR Flush time: 15~120sec

GAS time: 20~120sec

AIR Purge time: 5~120sec

Threshold value: ±10~50%

Auto calibration: ON, OFF

Auto alarm function check: ON, OFF

Auto print: ON, OFF

Bump test result: Displayed on TFT liquid crystal

Calibration Standard setting values

AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec

Auto alarm function check: ON, Auto print: OFF

Setting ranges

AIR Flush time: 15~120sec

GAS time: 20~120sec

AIR Purge time: 5~120sec

Auto alarm function check: ON, OFF

Auto print: ON, OFF

Calibration result: Displayed on touch screen display

Power (AC adaptor) 100~240VAC~50/60Hz
Dimension, weight 5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb
Operation temperature, humidity 0~104F, below 95~RH (no condensing)
USB printer port A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable
RJ-45 connector Ethernet port for a LAN connection
SD card slot Compatible with SD & SDHC cards
Joint connector Connecting SDM-6000 (Max 10 units) and SV-3
Inlet 4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR
Certification CE marking
Standard Functions Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection
Standard accessory Operating manual, filter, connecting plate, wall mount plate, PC controller software
Software PC controller software included as standard. Windows 7 & 10 compatible
Optional accessory SV-3 solenoid valve adds 3 additional calibration gas inputs

AC adaptor (15W output), AC adaptor (100W output)

Calibration Station utility software

Calibration gas & regulators

Tubing

Battery powered printer

Downloads:

Specifications:

Overview

Overview of the SDM-6000 Personal Gas Detection Calibrator

Versatile

The SDM-6000 is a versatile Personal Gas Detection Calibrator maintenance tool that automates the bump test/calibration of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).

Modular Design

SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations.

Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data.

Automated Routines

Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralised in one network location accessible by anyone with the PC Controlled software with access to the network location.

Specifications

Specifications:

Display Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light
LED 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking
BUMP test Standard setting values

AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec

Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON

Auto print: OFF

Setting range

AIR Flush time: 15~120sec

GAS time: 20~120sec

AIR Purge time: 5~120sec

Threshold value: ±10~50%

Auto calibration: ON, OFF

Auto alarm function check: ON, OFF

Auto print: ON, OFF

Bump test result: Displayed on TFT liquid crystal

Calibration Standard setting values

AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec

Auto alarm function check: ON, Auto print: OFF

Setting ranges

AIR Flush time: 15~120sec

GAS time: 20~120sec

AIR Purge time: 5~120sec

Auto alarm function check: ON, OFF

Auto print: ON, OFF

Calibration result: Displayed on touch screen display

Power (AC adaptor) 100~240VAC~50/60Hz
Dimension, weight 5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb
Operation temperature, humidity 0~104F, below 95~RH (no condensing)
USB printer port A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable
RJ-45 connector Ethernet port for a LAN connection
SD card slot Compatible with SD & SDHC cards
Joint connector Connecting SDM-6000 (Max 10 units) and SV-3
Inlet 4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR
Certification CE marking
Standard Functions Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection
Standard accessory Operating manual, filter, connecting plate, wall mount plate, PC controller software
Software PC controller software included as standard. Windows 7 & 10 compatible
Optional accessory SV-3 solenoid valve adds 3 additional calibration gas inputs

AC adaptor (15W output), AC adaptor (100W output)

Calibration Station utility software

Calibration gas & regulators

Tubing

Battery powered printer

Downloads

Downloads:

Specifications:

Video

Enquire Now

    Name*

    Phone*

    Location*

    Email*

    How did you hear about us?*

    What are you interested in?*

    Message