Features:
- Stand-alone station (no PC Required)
- Modular design
- Charging
- Calibration
- Bump Test
- Save Bump Test and Calibration records
- Bump test and calibration records copy to USB jump drive
- Includes PC software for viewing/archiving bump test and calibration records
Application/s:
- Personal monitoring
- Refineries/petrochemical
- Wastewater treatment / confined space
- Utilities
- Chemical plants
- Hazardous material
- Water
- Fire service
Overview:
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).
SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations. Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralised in one network location accessible by anyone with the PC Controlled software with access to the network location.
Specifications:
| Display | Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light |
| LED | 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking |
| BUMP test | Standard setting values
AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON Auto print: OFF Setting range AIR Flush time: 15~120sec GAS time: 20~120sec AIR Purge time: 5~120sec Threshold value: ±10~50% Auto calibration: ON, OFF Auto alarm function check: ON, OFF Auto print: ON, OFF Bump test result: Displayed on TFT liquid crystal |
| Calibration | Standard setting values
AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec Auto alarm function check: ON, Auto print: OFF Setting ranges AIR Flush time: 15~120sec GAS time: 20~120sec AIR Purge time: 5~120sec Auto alarm function check: ON, OFF Auto print: ON, OFF Calibration result: Displayed on touch screen display |
| Power (AC adaptor) | 100~240VAC~50/60Hz |
| Dimension, weight | 5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb |
| Operation temperature, humidity | 0~104F, below 95~RH (no condensing) |
| USB printer port | A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable |
| RJ-45 connector | Ethernet port for a LAN connection |
| SD card slot | Compatible with SD & SDHC cards |
| Joint connector | Connecting SDM-6000 (Max 10 units) and SV-3 |
| Inlet | 4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR |
| Certification | CE marking |
| Standard Functions | Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection |
| Standard accessory | Operating manual, filter, connecting plate, wall mount plate, PC controller software |
| Software | PC controller software included as standard. Windows 7 & 10 compatible |
| Optional accessory | SV-3 solenoid valve adds 3 additional calibration gas inputs
AC adaptor (15W output), AC adaptor (100W output) Calibration Station utility software Calibration gas & regulators Tubing Battery powered printer |
- Overview
-
Overview:
The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand alone device for charging, calibration and bump testing, with all records stored automatically for future upload to a PC via SD card (PC software and SD card included).
SDM-6000 calibration stations are modular by design and can easily connect to each other without the need of any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations. Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of data. Even if instruments are turned off, automated routines will power up the instruments and run as scheduled. All data collected from the PC Controlled software can also be centralised in one network location accessible by anyone with the PC Controlled software with access to the network location.
- Specifications
-
Specifications:
Display Touch panel TFT liquid crystal (3.5 inch, 320×240 image element QVGA, RGB1677 million colors) Back light LED 3 color [Green, Red, Orange]. Each status is indicated by Lighting / Blinking BUMP test Standard setting values AIR Flush time: 15sec, GAS time: 20sec, AIR Purge time: 5sec
Threshold value: ±50%, Auto Calibration: OFF, Auto alarm function check: ON
Auto print: OFF
Setting range
AIR Flush time: 15~120sec
GAS time: 20~120sec
AIR Purge time: 5~120sec
Threshold value: ±10~50%
Auto calibration: ON, OFF
Auto alarm function check: ON, OFF
Auto print: ON, OFF
Bump test result: Displayed on TFT liquid crystal
Calibration Standard setting values AIR Flush time: 30sec, GAS time: 90sec, AIR Purge time: 30sec
Auto alarm function check: ON, Auto print: OFF
Setting ranges
AIR Flush time: 15~120sec
GAS time: 20~120sec
AIR Purge time: 5~120sec
Auto alarm function check: ON, OFF
Auto print: ON, OFF
Calibration result: Displayed on touch screen display
Power (AC adaptor) 100~240VAC~50/60Hz Dimension, weight 5.11”(W) x 13’(H) x 7.2”(D)in Approx. 3.7lb Operation temperature, humidity 0~104F, below 95~RH (no condensing) USB printer port A type: Connects SDM-6000 printer (SII, DPU-S245) via USB cable RJ-45 connector Ethernet port for a LAN connection SD card slot Compatible with SD & SDHC cards Joint connector Connecting SDM-6000 (Max 10 units) and SV-3 Inlet 4 inlets: GAS 1 / GAS 2 / GAS 3 / AIR Certification CE marking Standard Functions Charging, Cal. cap fitting status monitoring, Power ON function, Alarm activation check, multi language (English, German, Japanese, Korean, Russian, Portuguese, Spanish, Italian, French), backlight adjusting, buzzer function, self-diagnosis for instruments connection Standard accessory Operating manual, filter, connecting plate, wall mount plate, PC controller software Software PC controller software included as standard. Windows 7 & 10 compatible Optional accessory SV-3 solenoid valve adds 3 additional calibration gas inputs AC adaptor (15W output), AC adaptor (100W output)
Calibration Station utility software
Calibration gas & regulators
Tubing
Battery powered printer
- Downloads
-