Stand Alone Oxygen Monitor – OX-600

OX-600 Stand Alone Oxygen Monitor

Features:

  • Operates with or without a controller
  • Tri-colour visual alarm display: Green=Normal, Yellow=Alarm 1, Red=Alarm 2
  • Large easy to read digital display
  • Two power options: 24 VDC, or 2 AA alkaline batteries
  • Operates up to 1 year on one set of AA alkaline batteries
  • Pressure compensation eliminates false alarms caused by pressure change
  • Remote mount sensor cable available

Application/s:

  • Laboratories
  • Cryogenic environments
  • Clean rooms
  • Industrial gas facilities
  • Gas storage rooms
  • Indoor monitoring
  • Iron and steel industry
  • Warehouses
  • Tunnels and garages
  • Vehicle service areas

Overview:

The Model OX-600 is an indoor, stand alone monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as oxygen levels reach each alarm level. The OX-600 has 2 preset alarms, and comes ready to operate with a simple wall mount bracket. It is capable of operating with two different power options; 24 VDC or alkaline batteries. If on alarm, the user is notified by an audible alarm tone and the multicoloured LED digital display.

The OX-600 uses a galvanic cell sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. Additional alarms and strobes may be integrated into the monitor. It can also be wired into a BMS (building management system) if required.

Specifications:

Detection Principle Galvanic cell
Gas Detected Oxygen (O2)
Detection Range 0 ~ 25 vol%
Display Resolution 0.1 vol%
Sampling Method Diffusion or remote sampling method with optional sensor extender cable
Indication Accuracy* Within ±0.7 vol%
Response Time* 90% Response within 30 seconds (T90)
Alarm Levels Two preset alarms (L-LL), alarm 1 = 19.5% vol, alarm 2 = 18.0% vol
Display of Alarm 1st gas alarm: gas concentration reading blinks or orange light, flashing AL1 light or orange light, buzzer 2nd gas alarm: gas concentration reading blinks or red light, flashing AL2 light or red light, buzzer
Alarm Logic Latching or Non-latching (including trouble alarm)
Alarm Contact Dry contact, Form A or Form B, Form A standard Factory Setting, normally open (closed in ALARM)
Display Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation)
Trouble Alarm / Self-Diagnosis System trouble / sensor connection trouble
Display of Trouble Alarm Buzzer / flashing of red error message
Relay Contact Rating 125VAC, 1A or 30VDC, 1A (Resistive load)
Output Signal 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0 – 1VDC (Non-isolated) *only for 0 – 1VDC Alkaline battery specification
Extender Cable Extender cable with remote box (3m, 5m, 10m or 20m lengths available)
Power Sources 24VDC±10%, or AA alkaline battery (2 each)
Power Consumption AC specification: MAX 3.5VA, DC specification: MAX 2W
Continuous Operation (for Alkaline Battery version) 1 year (no alarm, no indication) for alkaline battery option
Operating Temperature -17°C ~ 40°C
Operating Humidity 0 – 90%RH (non-condensing)
Mounting Equipment Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side
Dimension Body: approx. 80mm (W) x 120mm (H) x 35.5mm (D)
Weight DC specification: approx. 180g, Alkaline battery specification: approx. 230g

Downloads:

Specifications:

Videos:

OX-600 Alarm Operation

Overview

Overview:

The Model OX-600 is an indoor, stand alone monitor that detects Oxygen (O2) with a range of 0-25.0 % volume with 0.1% increments. It’s sleek, low-profile design is equipped with a unique tri-colour display, which changes colour as oxygen levels reach each alarm level. The OX-600 has 2 preset alarms, and comes ready to operate with a simple wall mount bracket. It is capable of operating with two different power options; 24 VDC or alkaline batteries. If on alarm, the user is notified by an audible alarm tone and the multicoloured LED digital display.

The OX-600 uses a galvanic cell sensor. This long life sensor is field-replaceable with no special tools required. The sensor can also be remotely mounted with an optional remote sensor cable. Additional alarms and strobes may be integrated into the monitor. It can also be wired into a BMS (building management system) if required.

Specifications

Specifications:

Detection Principle Galvanic cell
Gas Detected Oxygen (O2)
Detection Range 0 ~ 25 vol%
Display Resolution 0.1 vol%
Sampling Method Diffusion or remote sampling method with optional sensor extender cable
Indication Accuracy* Within ±0.7 vol%
Response Time* 90% Response within 30 seconds (T90)
Alarm Levels Two preset alarms (L-LL), alarm 1 = 19.5% vol, alarm 2 = 18.0% vol
Display of Alarm 1st gas alarm: gas concentration reading blinks or orange light, flashing AL1 light or orange light, buzzer 2nd gas alarm: gas concentration reading blinks or red light, flashing AL2 light or red light, buzzer
Alarm Logic Latching or Non-latching (including trouble alarm)
Alarm Contact Dry contact, Form A or Form B, Form A standard Factory Setting, normally open (closed in ALARM)
Display Digital LCD (3 digits, 7 segments / Green, Orange, Red) (For Alkaline battery version, the back light will be OFF during normal operation)
Trouble Alarm / Self-Diagnosis System trouble / sensor connection trouble
Display of Trouble Alarm Buzzer / flashing of red error message
Relay Contact Rating 125VAC, 1A or 30VDC, 1A (Resistive load)
Output Signal 4 ~ 20mA (Non-isolated, Resistive load under 300Ω) or 0 – 1VDC (Non-isolated) *only for 0 – 1VDC Alkaline battery specification
Extender Cable Extender cable with remote box (3m, 5m, 10m or 20m lengths available)
Power Sources 24VDC±10%, or AA alkaline battery (2 each)
Power Consumption AC specification: MAX 3.5VA, DC specification: MAX 2W
Continuous Operation (for Alkaline Battery version) 1 year (no alarm, no indication) for alkaline battery option
Operating Temperature -17°C ~ 40°C
Operating Humidity 0 – 90%RH (non-condensing)
Mounting Equipment Wall mounting type (by using accessory mounting plate or mount at one switch box) Cable inlet: Up, down and left/right, or rear side
Dimension Body: approx. 80mm (W) x 120mm (H) x 35.5mm (D)
Weight DC specification: approx. 180g, Alkaline battery specification: approx. 230g
Downloads

Downloads:

Specifications:

Videos

Videos:

OX-600 Alarm Operation

Enquire Now

    Name*

    Phone*

    Location

    Email*

    Message