Features:
- Target Gas is Selectable from list of seven gases
- Easy Grip and Robust Structure
- Ingress Proof EP 55, Protection rubber cover is available
- High Speed Low Concentration Reading
- Data Logging Function Available
- Alternative Product to the Gas Detection Tube
- LED Light
- Operates continuously for up to 12 hours
- Light weight at just 215 grams
Application/s:
- Fumigation
Overview:
The SP-220 Portable Fumigation Gas Leak Checker is designed to easily check for Fumigation Gas Leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Fumigation. The SP-220 Portable Fumigation Gas Leak Checker comes with many new features including an LED light, ingress protection to IP-55, and snapshot data logging. Data logging can easily be downloaded onto a PC via USB.
The lightweight yet robust design weighs just 215g, making it the ideal alternative to gas detection tubes. Powered by 2 x AA batteries the unit is ready to go and not held back by being out of charge, giving up to 12 hours run time.
When detecting leaks the unit is able to change sensitivity levels depending on the gas chosen, ensuring the best possible indication of leak size. Built with a new sensor resistant to silicone poisoning and a new charcoal filter this new instrument is the latest in Gas Leak Checker technology.
Specifications:
| Type | TYPE FUM (Fumigation) |
| Target Gas | Refer to the gas list |
| Detection Principle | Hot-wire semiconductor method |
| Sensor | SH-8662 |
| Measuring Range | Depends on target gas |
| Alarm Set Point | Depends on target gas |
| Accuracy | Displays 0.1 ppm – bar when applied PH3 0.3 ppm |
| Alarm Pattern | Gas alarm : Gas concentration reached or over the setting point. Trouble alarm: Sensor connection / breaking, low battery, low flow, circuit error and calibration error |
| Alarm Method | Non-latching |
| Display of Alarm | Gas alarm: Flashing LED, buzzer
Trouble Alarm: Flashing LED, buzzer, error display message |
| Alarm Delay Time | 0 sec. |
| Sampling Method | Sample draw |
| Response Time | 10 sec.: Time to reach 0.1 ppm when applied PH3 0.3 ppm |
| Output Signal | IrDA |
| Switch | [AIR] [MODE] [POWER] |
| Display Device | LCD |
| Display Contents | Gas name & concentration, time, battery, pilot and pump indicator |
| Power Source | 2 AA alkaline batteries |
| Operation | Continuous for more than 12 hours |
| Operating Temp & Humidity | -20~+55°C, 0~95%RH (non-condensing) |
| Dimensions / Weight | 200mm (H) x 44mm (D) x 47mm (W), 215 grams |
| Ingress Proof | IP55 |
| Function | Manual LCD backlight (automatically ON when alarming), peak value, snap logging, protection rubber cover |
| Standard Accessories | Hand strap, taper nozzle, protection rubber cover |
| Warranty | Two year warranty on material and sensor |
Gases Measured:
| Gas name | Display | Conc. Display
1 (ppm) |
Display
2 (ppm) |
Display
3 (ppm) |
| Carbon disulfide | CS2 | 0.1 | – | – |
| Ethylene dibromide | C2H4Br2 | 1 | 10 | 30 |
| Hydrogen cyanide | HCN | 1 | – | – |
| Methyl bromide | CH3Br | 1 | 20 | 100 |
| Methyl iodide | CH3I | 1 | 10 | 30 |
| Phosphine | PH3 | 0.1 | 2 | 4.5 |
| Sulfuryl fluoride | SO2F2 | – | – | 800 |
- Overview
-
Overview:
The SP-220 Portable Fumigation Gas Leak Checker is designed to easily check for Fumigation Gas Leaks. With 12 hours operation on 2 AA size Alkaline batteries and weighing in at only 215 grams this instrument is ideal for Fumigation. The SP-220 Portable Fumigation Gas Leak Checker comes with many new features including an LED light, ingress protection to IP-55, and snapshot data logging. Data logging can easily be downloaded onto a PC via USB.
The lightweight yet robust design weighs just 215g, making it the ideal alternative to gas detection tubes. Powered by 2 x AA batteries the unit is ready to go and not held back by being out of charge, giving up to 12 hours run time.
When detecting leaks the unit is able to change sensitivity levels depending on the gas chosen, ensuring the best possible indication of leak size. Built with a new sensor resistant to silicone poisoning and a new charcoal filter this new instrument is the latest in Gas Leak Checker technology.
- Specifications
-
Specifications:
Type TYPE FUM (Fumigation) Target Gas Refer to the gas list Detection Principle Hot-wire semiconductor method Sensor SH-8662 Measuring Range Depends on target gas Alarm Set Point Depends on target gas Accuracy Displays 0.1 ppm – bar when applied PH3 0.3 ppm Alarm Pattern Gas alarm : Gas concentration reached or over the setting point. Trouble alarm: Sensor connection / breaking, low battery, low flow, circuit error and calibration error Alarm Method Non-latching Display of Alarm Gas alarm: Flashing LED, buzzer Trouble Alarm: Flashing LED, buzzer, error display message
Alarm Delay Time 0 sec. Sampling Method Sample draw Response Time 10 sec.: Time to reach 0.1 ppm when applied PH3 0.3 ppm Output Signal IrDA Switch [AIR] [MODE] [POWER] Display Device LCD Display Contents Gas name & concentration, time, battery, pilot and pump indicator Power Source 2 AA alkaline batteries Operation Continuous for more than 12 hours Operating Temp & Humidity -20~+55°C, 0~95%RH (non-condensing) Dimensions / Weight 200mm (H) x 44mm (D) x 47mm (W), 215 grams Ingress Proof IP55 Function Manual LCD backlight (automatically ON when alarming), peak value, snap logging, protection rubber cover Standard Accessories Hand strap, taper nozzle, protection rubber cover Warranty Two year warranty on material and sensor - Gases Measured
-
Gases Measured:
Gas name Display Conc. Display 1 (ppm)
Display 2 (ppm)
Display 3 (ppm)
Carbon disulfide CS2 0.1 – – Ethylene dibromide C2H4Br2 1 10 30 Hydrogen cyanide HCN 1 – – Methyl bromide CH3Br 1 20 100 Methyl iodide CH3I 1 10 30 Phosphine PH3 0.1 2 4.5 Sulfuryl fluoride SO2F2 – – 800 - Downloads
-