Features
- Dual Audible alarm ports
- 3 visual alarm LED’s
- Bluetooth
- Vibration alarm
- IP68 Waterproof / dust-proof design
-
Non-Compliance indicator
-
3 Year warranty
The Worlds Smallest and Lightest 4 Confined Gas Monitor
A common issue when working in a confined space is the size of instrument used. With the smallest gas monitor on the market we take this issue out of the equation.
IN STOCK
The GX-3R one to four gas personal monitor picks up where the GX-2009 left off. It’s the worlds smallest four gas personal monitor weighing only 100 grams and can comfortably be worn within workers breathing zone (55mm W x 64mm H x 26mm D). It simultaneously monitors and displays LEL combustibles, O2, CO (Hydrogen compensated CO also available), and H2S.
Optional Health and Safety defines the breathing zone as a 25cm radius around the worker’s nose and mouth and requires that worker exposure air samples collected in the breathing zone. Air sampling filters may be attached to the collar or lapel. Traditionally this means only a single gas monitor would be small enough for a worker to wear ‘In the breathing zone practically’. Now there is a four gas monitor smaller than many single gas monitors.
This instrument represents the latest evolution of gas detection technology utilising a new generation of microsensors. The LEL sensor has a unique design, with two active filaments in one sensor to increase its resistance to silicone poisoning. If one filament gets poisoned, the second filament takes over. The new O2 sensor is electrochemical with a 5-year life span. H2S and CO are now available in a combo microsensor.
Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it’s 3 LED lights every 30 seconds, if the device has been exposed to a gas or has not been bump tested or calibration is due. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved.
GX-3R
GX-3R Startup
GX-3R Attach Remove Calibration Adaptor
GX-3R IP-68 Rating
GX-3R Intro Features
GX-3R Accessories
Gas Detected |
All Combustible gases (Methane as standard) |
Oxygen (O2) |
Hydrogen Sulphide (H2S) |
Carbon Monoxide (CO) |
Detection Range (Increments) |
0 – 100% LEL (1% LEL) |
0 – 25.0% Vol (0.1% Vol) | 0 – 100 ppm (0.5 ppm) |
0 – 500 ppm (1 ppm) |
Sampling Method |
Diffusion sampling, hand aspirator or motorised pump optional | |||
Display |
Digital LCD displays with 7 segment plus 14 segment plus icon | |||
Present Alarms (User Adjustable) |
1st alarm 5% LEL 2nd alarm 10% LEL Over alarm 100% LEL |
Low alarm 19.5% High alarm 23.5% Over alarm 40.0% | 1st alarm 10 ppm 2nd alarm 15 ppm TWA alarm 10 ppm STEL alarm 15 ppm Over alarm 200 ppm |
1st alarm 30 ppm 2nd alarm 60 ppm TWA alarm 30 ppm STEL alarm 60 ppm Over alarm 2000 ppm |
Types of Alarms |
Gas Alarm: Trouble Alarm: 2 Increasing alarms, STEL, TWA, overscale alarm. O2 decreasing/increasing. Sensor disconnection, low battery, circuit error, calibration range error | |||
Display of Alarms |
Gas Alarm: Trouble Alarm: Flashing LEDs, continuous buzzer (100 db @ 30 cm), flashing gas value, vibration Flashing LEDs, intermittent buzzer (95 db @ 30 cm), display of error message | |||
Operating Temp & Humidity |
40°C to +60°C, 0 to 95% RH, non-condensing (splash resistant) | |||
Response Time |
Within 30 seconds (T90) | |||
Continuous Operation |
25 hours after a full 3 hour charge | |||
Power Source |
Lithium-ion battery | |||
Safety Design/Approvals |
Ex da ia IIC T4 Ga or EX ia IIC T4 Ga and EX da ia I MA or EX ia I Ma (IECEx) / I M1Ex da ia I Ma//II 1G Ex da ia IICT4 Ga (ATEX) | |||
Dimension & Weight |
Approx 55mm (H) x 64mm (W) x 26mm (D), approx 100g | |||
Case Material |
Explosion proof, dust and water resistant to IP-68 (2m,1h) approval. Drop height 7m | |||
Controls |
Two buttons: POWER / MODE, AIR | |||
Datalogging |
Logs user ID, station ID, Calibration & Bump Test history, Alarm Events & Alarm Trends | |||
Standard Accessories |
Alligator clip Charger Calibration cup |
|||
Optional Accessories |
Padded carrying case for GX-3R and accessories RP-3R Attachable sampling Pump with tapered rubber nipple, 3m hose and probe (up to 12m hose available) USB to IrDA downloading cable for datalogger SDM-3R calibration station Calibration Cup | |||
Warranty |
Three years material and workmanship |