Features:
- Operates with or without a controller
- Direct digital readout with OLED cold temperature display
- Available gases include
LEL, O2, H2S, CO, CO2, and 100% Vol CH4
Toxic gases include NH3, AsH3, Cl2, ClO2, HCN, NO2, & SO2
- Infrared sensor for combustibles and CO2
- 4-20 mA & digital Modbus outputs standard
- 2 fully programmable alarm relays & fail relay
- Non-intrusive calibration via magnetic wand
- Explosion proof construction
- Patented water repellent sensor cover
- User friendly setup, push buttons & OLED menus
- Long-life sensors (2 + years typical)
Application/s:
- Petrochemical plants
- Refineries
- Water & wastewater treatment plants
- Pulp & paper mills
- Manufacturing facilities
- Automotive
- Semiconductor plants
- Chemical plants
Stand Alone Transmitter M2A-XL Overview:
The M2A-XL is a state-of-the-art, stand-alone transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A-XL connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user-friendly push buttons and OLED menus. It utilises a magnetic wand technique for performing non-intrusive calibration. The M2A-XL features automatic zero-drift correction, resulting in more stable readings and reducing the need for adjustments due to sensor aging.
The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window. The toxic sensors are electrochemical plug-in sensors that provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, AsH3, Cl2, ClO2, HCN, PH3, NO2 and SO2
Explosion Proof Transmitter
The M2A-XL housing does not need to be opened for zeroing or calibration, so it is unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.
Stand Alone Transmitter M2A-XL Specifications:
For detailed Specifications for the M2A-XL Stand Alone Transmitter Explosion Proof Transmitter please refer to our Product Datasheet
- Overview
-
Stand Alone Transmitter M2A-XL Overview:
The M2A-XL is a state-of-the-art, stand-alone transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A-XL connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user-friendly push buttons and OLED menus. It utilises a magnetic wand technique for performing non-intrusive calibration. The M2A-XL features automatic zero-drift correction, resulting in more stable readings and reducing the need for adjustments due to sensor aging.
The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window. The toxic sensors are electrochemical plug-in sensors that provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors available for NH3, AsH3, Cl2, ClO2, HCN, PH3, NO2 and SO2
Explosion Proof Transmitter
The M2A-XL housing does not need to be opened for zeroing or calibration, so it is unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.
- Specifications
-
Stand Alone Transmitter M2A-XL Specifications:
For detailed Specifications for the M2A-XL Stand Alone Transmitter Explosion Proof Transmitter please refer to our Product Datasheet
- Datasheet