Features:
- Target Gas can be selected from a list of 25 gases
- Pump Boost ( Normal 300ml/min Boost 600ml/min ) [for use with long sample lines.]
- New probe / Tefron tube are applied as standard
- Continuous operation for 20 hours
- 2 way gas concentration display (Value & level indication)
- Intrinsic safety ex-proof
- IP 67 rating
- Data logger available
- 1st & 2nd gas alarm points
Application/s:
- Power Station Generator
- Hydrogen Economy
The NC-1000 portable combustible gas detector has attractive features, including: direct reading of 25 target gases, data logging, pump boost, ingress proof rating IP67, Intrinsically safe with ATEX approval for hazardous areas. Ideal for checking gas leaks or monitoring the presence of gas in hazardous areas typically found in oil refineries and petrochemical plants.
The NC-1000 portable combustible gas detector supersedes and builds on the previous model GP-88A, using latest technology and advanced features. A safety rating of ExiaⅡCT4 allows users to detect a gas at hazardous area Zone 0 where an explosion hazard always exists. Calibration is to one gas only ( methane or ISO-butane ), then any one of 25 target gases can be selected by a simple button operation. Optional filters can be used with the standard gas sampling probe to remove hydrogen sulphide (H2S), or silicone that would normally damage this type of catalytic sensor.
Specifications:
| Model | NC-1000 |
| Gas detected | Combustible gas (CH4, HC etc.refer to the gas list) |
| Sensor principle | New ceramic |
| Detection range | 0-10000 ppm |
| Alarm Types | Gas alarm: Latching, 1st and 2nd alarm
Trouble alarm: Low flow, sensor disconnection, low battery voltage, circuit abnormality, detection range abnormality |
| Alarm Methods | Gas alarm: Continuous buzzer, flashing lights, gas concentration reading blinks
Trouble alarm: Intermittent buzzer, flashing lights, trouble condition is displayed |
| Preset Alarms | 1st: 250 ppm 2nd: 500 ppm |
| Indication Accuracy | Low range: Full scale +/- 10% (at same condition)High range: Full scale +/- 5% (at same condition) |
| Response time | Within 30 seconds (T90) |
| Sampling method | Sample-draw, Flow rate > 0.3L/min (Approx. 0.6L/min for pump boosting mode) |
| Indication precision | Digital LCD (7 segments) + Bar meter (50 segments) + Status informationDigital numeral 7 segments indication: 0 – 10000ppmDigital bar meter indication: Auto range0〜1000ppm (Low range)0〜10000ppm (High range) |
| Power source | AA alkaline battery, 4pcs |
| Continuous
operation |
CH4 version: Approx. 15 hours / HC version: Approx. 20 hours
(New battery, no alarm and no light, at 25℃, pump Low mode) |
| Operating temp.
& humidity |
Operating temperature 2-0°C〜50℃, humidity 0 – 95%RH (non condensing)Storage temperature -25°C 〜60℃, humidity 0 – 95%RH (non condensing) |
| Dimension | 80.1mm (W) x 124mm (H) x 36mm (D) |
| Weight | Approx. 260g (exclude alkaline battery) |
| Water dust proof | IP 67 |
| Safety design | Intrinsically safety Ex ia IIC/IIB T4 Ga |
| Approvals | Ex-proof: IECEx, ATEX |
| Function | LCD backlight, data logger, log data indication, peak indication pump boosting, gas select. |
Gases Detected:
Sensitivity curve for 25 gases is originally loaded in NC-1000. Target gas can be switched by button operation.
|
No. |
Gas List |
Lower explosion limit LEL |
| 1 | Methane | 5.0vol% |
| 2 | Isobutane | 1.8vol% |
| 3 | Hydrogen | 4.0vol% |
| 4 | Methanol | 5.5vol% |
| 5 | Acetylene | 1.5vol% |
| 6 | Etylene | 2.7vol% |
| 7 | Ethane | 3.0vol% |
| 8 | Ethanol | 3.3vol% |
| 9 | Propylene | 2.0vol% |
| 10 | Acetone | 2.15vol% |
| 11 | Propane | 2.0vol% |
| 12 | Butadiene | 1.1vol% |
| 13 | Cyclopentane | 1.4vol% |
| 14 | Benzene | 1.2vol% |
| 15 | ｎ-Hexane | 1.2vol% |
| 16 | Toluene | 1.2vol% |
| 17 | Heptane | 1.1vol% |
| 18 | Xylene | 1.0vol% |
| 19 | Ethyl acetate | 2.1vol% |
| 20 | IPA | 2.0vol% |
| 21 | MEK | 1.8vol% |
| 22 | Methyl methacrylate | 1.7vol% |
| 23 | Dimethylether | 3.0vol% |
| 24 | Methyl isobutyl ketone | 1.2vol% |
| 25 | Tetrahydrofuran | 2.0vol% |
Note 1) Indication accuracy, response time etc. are confirmed with calibration gas.
Note 2) Contact Control Equipment Pty Ltd if NC-1000 is required to be calibrated with other than CH4, i-C4H10.
Note 3) Gas selection is not available when NC-1000 is calibrated with other than CH4, i-C4H10.
- Overview
-
The NC-1000 portable combustible gas detector has attractive features, including: direct reading of 25 target gases, data logging, pump boost, ingress proof rating IP67, Intrinsically safe with ATEX approval for hazardous areas. Ideal for checking gas leaks or monitoring the presence of gas in hazardous areas typically found in oil refineries and petrochemical plants.
The NC-1000 portable combustible gas detector supersedes and builds on the previous model GP-88A, using latest technology and advanced features. A safety rating of ExiaⅡCT4 allows users to detect a gas at hazardous area Zone 0 where an explosion hazard always exists. Calibration is to one gas only ( methane or ISO-butane ), then any one of 25 target gases can be selected by a simple button operation. Optional filters can be used with the standard gas sampling probe to remove hydrogen sulphide (H2S), or silicone that would normally damage this type of catalytic sensor.
- Specifications
-
Specifications:
Model NC-1000 Gas detected Combustible gas
(CH4, HC etc.refer to the gas list)Sensor principle New ceramic Detection range 0-10000 ppm Alarm Types Gas alarm: Latching, 1st and 2nd alarm Trouble alarm: Low flow, sensor disconnection, low battery voltage, circuit abnormality, detection range abnormality
Alarm Methods Gas alarm: Continuous buzzer, flashing lights, gas concentration reading blinks Trouble alarm: Intermittent buzzer, flashing lights, trouble condition is displayed
Preset Alarms 1st: 250 ppm 2nd: 500 ppm Indication Accuracy Low range: Full scale +/- 10%
(at same condition)High range: Full scale +/- 5%
(at same condition)Response time Within 30 seconds (T90) Sampling method Sample-draw, Flow rate > 0.3L/min
(Approx. 0.6L/min for pump boosting mode)Indication precision Digital LCD (7 segments) + Bar meter
(50 segments) + Status informationDigital numeral 7 segments indication:
0 – 10000ppmDigital bar meter indication: Auto range0〜1000ppm (Low range)0〜10000ppm (High range)Power source AA alkaline battery, 4pcs Continuous operation
CH4 version: Approx. 15 hours / HC version: Approx. 20 hours (New battery, no alarm and no light, at 25℃, pump Low mode)
Operating temp. & humidity
Operating temperature 2-0°C〜50℃,
humidity 0 – 95%RH (non condensing)Storage temperature -25°C 〜60℃,
humidity 0 – 95%RH (non condensing)Dimension 80.1mm (W) x 124mm (H) x 36mm (D) Weight Approx. 260g (exclude alkaline battery) Water dust proof IP 67 Safety design Intrinsically safety Ex ia IIC/IIB T4 Ga Approvals Ex-proof: IECEx, ATEX Function LCD backlight, data logger, log data indication, peak indication pump boosting, gas select. - Gas Detected
-
Gases Detected:
Sensitivity curve for 25 gases is originally loaded in NC-1000. Target gas can be switched by button operation.
No.
Gas List Lower explosion limit
LEL
1 Methane 5.0vol% 2 Isobutane 1.8vol% 3 Hydrogen 4.0vol% 4 Methanol 5.5vol% 5 Acetylene 1.5vol% 6 Etylene 2.7vol% 7 Ethane 3.0vol% 8 Ethanol 3.3vol% 9 Propylene 2.0vol% 10 Acetone 2.15vol% 11 Propane 2.0vol% 12 Butadiene 1.1vol% 13 Cyclopentane 1.4vol% 14 Benzene 1.2vol% 15 ｎ-Hexane 1.2vol% 16 Toluene 1.2vol% 17 Heptane 1.1vol% 18 Xylene 1.0vol% 19 Ethyl acetate 2.1vol% 20 IPA 2.0vol% 21 MEK 1.8vol% 22 Methyl methacrylate 1.7vol% 23 Dimethylether 3.0vol% 24 Methyl isobutyl ketone 1.2vol% 25 Tetrahydrofuran 2.0vol% Note 1) Indication accuracy, response time etc. are confirmed with calibration gas.
Note 2) Contact Control Equipment Pty Ltd if NC-1000 is required to be calibrated with other than CH4, i-C4H10.
Note 3) Gas selection is not available when NC-1000 is calibrated with other than CH4, i-C4H10.
- Downloads
-
Enquire Now
Support Documentation
[su_button url=”https://controlequipment.com.au/wp-content/uploads/2021/07/NC-1000.pdf” style=”flat” background=”#000fff” size=”10″ radius=”5″]View the Brochure[/su_button]