The Beacon 410A is a highly configurable, microprocessor-based, flexible and easy to use 4 channel wall mount gas detection controller. It simultaneously displays the gas type, readings, and status for four channels of gas detection. It can monitor any combination of direct connect sensors (LEL, O2, CO2, and toxic gas sensors), as well as any 4-20mA transmitter.
Overview of the 4 Channel Wall Mount Gas Detection Controller:
The Beacon 410 4 channel wall mount gas detection controller is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection. A digital Modbus interface for remote logging of data via a Modbus network comes standard.
The Beacon 410 can monitor any combination of direct connect sensors (LEL combustibles, oxygen, hydrogen sulphide, carbon monoxide, and carbon dioxide and toxic gas sensors) as well as any 4-20mA transmitters.
Each channel has 3 fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has 2 dedicated fully configurable relays and there is also a bank of common relays. The common relays can optionally be configured as additional channel relays allowing up to 3 alarm relays per channel.
Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time. Field calibration is made simple by the easy to use calibration mode. A fully configurable high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, an external 24 VDC source, or a 24 VDC backup battery. A trickle charging battery backup feature is also available as an option.
All features and functions of the Beacon 410 are controlled by easy to use menus on the backlit LCD display. The form-C (SPDT) relay contacts are rated at 10A, 250V, reducing or eliminating the need for additional slave relays. All features of the Beacon 410 are built into the unit so you never need to purchase or maintain any “add-on” cards or components.
| Physical | |
| Dimensions: | Height 216mm Width 178 mm Depth: 109 mm |
| Enclosure: | NEMA 4X non-metallic for indoor and outdoor locations |
| Conduit Connection: | 20mm NPT conduit hubs, 4 provided, for sensor, power and relay wiring. |
| Wiring Termination: | Screw type terminal block, 14 gauge max. |
| Power: | 240 VAC, or 24 VDC nominal optional – 115 VAC. Battery backup option available |
| Controls:
|
Display PCB Control switches:
• UP/YES push button switch • ESCAPE push button switch • External reset switch • DOWN/NO push button switch • ENTER push button switch • On/Off toggle switch • DOWN/NO push button switch • ENTER push button switch • On/Off toggle switch |
| Environmental
|
|
| Operating Temp: | -20°C to 50°C |
| Storage Temp: | -20°C to 70°C |
| Relative Humidity: | 0 – 95% RH (non-condensing) |
| Enclosure Rating: | NEMA-4X enclosure, waterproof, chemical and weather resistant |
| Inputs | |
| Direct Wired Sensors: | LEL, Oxygen, Carbon Monoxide, Hydrogen Sulphide, and Carbon Dioxide
Remote amp not required for less than 15 metres |
| 4-20 mA Sensors: | Accepts any 4-20 mA transmitters (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. Wiring distances up to 5,000 meters |
| Sampling methods: | Diffusion and sample draw heads available |
| Outputs | |
| Relays: | Two flexible, programmable Form-C (C, NO, NC) relays per channel, plus five common relays (Fail, Alarm-1, Alarm-2, Alarm-3, Alarm-Any). Common relays may optionally be assigned to function as additional channel alarm relays, providing for up to three alarm relays per channel. 10A contact rating |
| 4-20 mA: | Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel |
| RS-485: | Modbus format RS-485 serial output of all channel data, including gas reading and alarm status |
| Display: | 4 x 20 backlit LCD display |
| Audible: | Built-in audible alarm, 94 dB, mounted on enclosure. Coded output: Pulsing = gas alarm, Steady = fail |
| Visual: | 1. Alarm LED’s (on Display PCB)
Alarm 1 – (yellow), Alarm 2 – (orange), Alarm 3 – (red), Fail- (yellow) 2. Green pilot LED to indicate AC power connected (on Display PCB) 3. An optional 24 VDC NEMA 4X strobe mounted to top of case |
| Warranty: | 1 year materials and workmanship |
| Ammonia (NH3) | 0 – 75.0 ppm |
| Arsine (AsH3) | 0 – 0.2 ppm |
| Boron Trichloride (BCl3) | 0 – 15.0 ppm |
| Carbon Dioxide (CO2) | 0 – 1.0 % |
| Carbon Monoxide (CO) | 0 – 300 ppm |
| Chlorine (Cl2) | 0 – 3.0 ppm |
| Chlorine Dioxide (ClO2) | 0 – 1.0 ppm |
| Chlorine Trifluoride (CIF3) | 0 – 1.0 ppm |
| Combustibles | 0 – 100% LEL |
| Diborane (B2H6) | 0 – 30.0 ppm |
| Fluorine (F2) | 0 – 5/15 ppm |
| Hydrogen (H2) | 0 – 2000 ppm |
| Hydrogen Chloride (HCl) | 0 – 15.0 ppm |
| Hydrogen Fluoride (HF) | 0 – 9.0 ppm |
| Hydrogen Sulfide (H2S) | 0 – 100.0 ppm |
| Nitric Oxide (NO) | 0 – 100.0 ppm |
| Nitrogen Dioxide (NO2) | 0 – 15.0 ppm |
| Nitrogen Trifluoride (NF3) | 0 – 30.0 ppm |
| Oxygen (O2) | 0 – 25.0% |
| Ozone (O3) | 0 – 1.0 ppm |
| Phosphine (PH3) | 0 – 1.0 ppm |
| Silane (SiH4) | 0 – 15.0 ppm |
| Sulphur Dioxide (SO2) | 0 – 30.0 ppm |
| TEOS (Si(OC2H5)4) | 0 – 15/30 ppm |
Overview of the 4 Channel Wall Mount Gas Detection Controller:
The Beacon 410 4 channel wall mount gas detection controller is a highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor. It simultaneously displays the gas type, readings, and status for 4 channels of gas detection. A digital Modbus interface for remote logging of data via a Modbus network comes standard.
The Beacon 410 can monitor any combination of direct connect sensors (LEL combustibles, oxygen, hydrogen sulphide, carbon monoxide, and carbon dioxide and toxic gas sensors) as well as any 4-20mA transmitters.
Each channel has 3 fully configurable alarm points. A built-in silenceable audible alarm alerts you to alarm conditions. Each channel also has 2 dedicated fully configurable relays and there is also a bank of common relays. The common relays can optionally be configured as additional channel relays allowing up to 3 alarm relays per channel.
Each channel provides a 4-20mA output signal. A digital Modbus interface for remote logging of data via a Modbus network is standard. A Min-Max feature retains high & low peak readings for review at any time. Field calibration is made simple by the easy to use calibration mode. A fully configurable high visibility strobe is available as an option. The unit can be powered from 115/220 VAC, an external 24 VDC source, or a 24 VDC backup battery. A trickle charging battery backup feature is also available as an option.
All features and functions of the Beacon 410 are controlled by easy to use menus on the backlit LCD display. The form-C (SPDT) relay contacts are rated at 10A, 250V, reducing or eliminating the need for additional slave relays. All features of the Beacon 410 are built into the unit so you never need to purchase or maintain any “add-on” cards or components.
| Physical | |
| Dimensions: | Height 216mm Width 178 mm Depth: 109 mm |
| Enclosure: | NEMA 4X non-metallic for indoor and outdoor locations |
| Conduit Connection: | 20mm NPT conduit hubs, 4 provided, for sensor, power and relay wiring. |
| Wiring Termination: | Screw type terminal block, 14 gauge max. |
| Power: | 240 VAC, or 24 VDC nominal optional – 115 VAC. Battery backup option available |
| Controls:
|
Display PCB Control switches:
• UP/YES push button switch • ESCAPE push button switch • External reset switch • DOWN/NO push button switch • ENTER push button switch • On/Off toggle switch • DOWN/NO push button switch • ENTER push button switch • On/Off toggle switch |
| Environmental
|
|
| Operating Temp: | -20°C to 50°C |
| Storage Temp: | -20°C to 70°C |
| Relative Humidity: | 0 – 95% RH (non-condensing) |
| Enclosure Rating: | NEMA-4X enclosure, waterproof, chemical and weather resistant |
| Inputs | |
| Direct Wired Sensors: | LEL, Oxygen, Carbon Monoxide, Hydrogen Sulphide, and Carbon Dioxide
Remote amp not required for less than 15 metres |
| 4-20 mA Sensors: | Accepts any 4-20 mA transmitters (24 VDC, 2 or 3 wire). A wide variety of RKI/Riken sensors are available with 4-20 mA signals. Wiring distances up to 5,000 meters |
| Sampling methods: | Diffusion and sample draw heads available |
| Outputs | |
| Relays: | Two flexible, programmable Form-C (C, NO, NC) relays per channel, plus five common relays (Fail, Alarm-1, Alarm-2, Alarm-3, Alarm-Any). Common relays may optionally be assigned to function as additional channel alarm relays, providing for up to three alarm relays per channel. 10A contact rating |
| 4-20 mA: | Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel |
| RS-485: | Modbus format RS-485 serial output of all channel data, including gas reading and alarm status |
| Display: | 4 x 20 backlit LCD display |
| Audible: | Built-in audible alarm, 94 dB, mounted on enclosure. Coded output: Pulsing = gas alarm, Steady = fail |
| Visual: | 1. Alarm LED’s (on Display PCB)
Alarm 1 – (yellow), Alarm 2 – (orange), Alarm 3 – (red), Fail- (yellow) 2. Green pilot LED to indicate AC power connected (on Display PCB) 3. An optional 24 VDC NEMA 4X strobe mounted to top of case |
| Warranty: | 1 year materials and workmanship |
| Ammonia (NH3) | 0 – 75.0 ppm |
| Arsine (AsH3) | 0 – 0.2 ppm |
| Boron Trichloride (BCl3) | 0 – 15.0 ppm |
| Carbon Dioxide (CO2) | 0 – 1.0 % |
| Carbon Monoxide (CO) | 0 – 300 ppm |
| Chlorine (Cl2) | 0 – 3.0 ppm |
| Chlorine Dioxide (ClO2) | 0 – 1.0 ppm |
| Chlorine Trifluoride (CIF3) | 0 – 1.0 ppm |
| Combustibles | 0 – 100% LEL |
| Diborane (B2H6) | 0 – 30.0 ppm |
| Fluorine (F2) | 0 – 5/15 ppm |
| Hydrogen (H2) | 0 – 2000 ppm |
| Hydrogen Chloride (HCl) | 0 – 15.0 ppm |
| Hydrogen Fluoride (HF) | 0 – 9.0 ppm |
| Hydrogen Sulfide (H2S) | 0 – 100.0 ppm |
| Nitric Oxide (NO) | 0 – 100.0 ppm |
| Nitrogen Dioxide (NO2) | 0 – 15.0 ppm |
| Nitrogen Trifluoride (NF3) | 0 – 30.0 ppm |
| Oxygen (O2) | 0 – 25.0% |
| Ozone (O3) | 0 – 1.0 ppm |
| Phosphine (PH3) | 0 – 1.0 ppm |
| Silane (SiH4) | 0 – 15.0 ppm |
| Sulphur Dioxide (SO2) | 0 – 30.0 ppm |
| TEOS (Si(OC2H5)4) | 0 – 15/30 ppm |