Features:
- 2-year warranty, including replacement sensor element
- SAFECELL technology checks electrical viability of the electrochemical cell
- Electronics are potted to completely eliminate corrosion in wet environments
- Ammonia specific electrochemical sensor technology. No false alarms
- Industry standard linear 4-20 mA output
- Corrosion, weather, and chemical resistant polycarbonate sensor enclosure
- Intelligent-design temperature controlled enclosure for improved cell life
- Sensor designed to adapt to any harsh environment from -50°F to +122°F
- Accurately monitor OSHA’s PEL, STEL, and IDLH setpoints
- Real-time continuous monitoring for early leak detection
- Any sensor can be field calibrated to any range listed
Application/s:
- Food Processing areas
- Cold Storage
- Compressor Rooms
- Tank Rooms
- Ventilation Ducts
- Sea Vessels
- Refrigeration Systems
- Perimeter Monitoring
- Pulp and Paper
- Heat Treatment
- Breweries
- Chemical Plants
Overview of the Ammonia Gas Detector:
Finally, one ammonia gas detector sensor designed to perform in all environments. The intelligently adaptive GG-NH3 goes anywhere.
The GG-NH3 utilizes proven electrochemical sensor technology for fast and accurate leak detection. The standard detection range of the GGNH3 provides real-time continuous monitoring of ammonia concentrations accurately down to 5 ppm, with no false alarms.
Every GG-NH3 sensor comes equipped with an intelligent internal temperature control designed to perform in the harshest areas. The controlled environment provides optimum moisture control for extended cell life. The highquality injection-molded polycarbonate enclosure offers excellent chemical corrosion protection and high impact resistance.
The GG-NH3 provides an industry standard linear 4-20 mA output signal compatible with most gas detection systems and PLCs. The output signal is not affected by drastic temperature variations such as washdowns, defrost cycles, etc. SAFECELL checks the electrical viability of the electrochemical cell and drops signal to 0.5 mA when the cell is failed or missing.
Specifications of Ammonia Gas Detector:
| Input Power: | +24 VDC, 350 mA |
| Detection Principle: | Electrochemical |
| Detection Method: | Diffusion |
| Gases | Ammonia (NH3) |
| Ranges | 0/100 ppm (standard) 0/250 ppm 0/500 ppm 0/1000 ppm Custom ranges available. Call for more information |
| Output Signal: | Linear 4-20 mA (max input impedance: 700 Ohms) |
| Linearity: | +/- 1% of full-scale |
| Repeatability: | +/- 1% of full-scale |
| Response Time: | T50 = less than 30 seconds T90 = less than 60 seconds |
| Accuracy: | +/- 5% of value, but dependent on calibration gas accuracy and time since last calibration A11 |
| Zero Drift: | Less than 0.1% of full-scale per month, noncumulative |
| Span Drift: | Application dependent, but generally less than 3% per month |
| Temperature Range: | -50°F to +122°F (-46°C to +50°C) |
| Humidity Range: | 5% to 100% condensing |
| Wiring Connections: | 3 conductor, shielded, stranded, 20 AWG cable (General Cable C2525A or equivalent) up to 1500 ft |
| Terminal Block Plugs: (Field Wiring) | 12-26 AWG, torque 4 lbs-in |
| Enclosure: | NEMA 3RX injection-molded, washdown-duty polycarbonate sensor housing with hinged lid and captive screw. For non-classified areas. Optional 316 18 GA, NEMA 3RX washdown-duty stainless steel housing with hinged lid and captive screw. For non-classified areas |
| Dimensions: | 7.5” high x 6.5” wide x 3.75” deep |
| Weight: | 2.15 lbs |
| Certification: | SGS listed to UL 61010-1, and CSA C22.2 No. 61010-1-12 |
| Warranty: | 2-years (including sensor element) |
Downloads:
- Overview
-
Overview of the Ammonia Gas Detector:
Finally, one ammonia gas detector sensor designed to perform in all environments. The intelligently adaptive GG-NH3 goes anywhere.
The GG-NH3 utilizes proven electrochemical sensor technology for fast and accurate leak detection. The standard detection range of the GGNH3 provides real-time continuous monitoring of ammonia concentrations accurately down to 5 ppm, with no false alarms.
Every GG-NH3 sensor comes equipped with an intelligent internal temperature control designed to perform in the harshest areas. The controlled environment provides optimum moisture control for extended cell life. The highquality injection-molded polycarbonate enclosure offers excellent chemical corrosion protection and high impact resistance.
The GG-NH3 provides an industry standard linear 4-20 mA output signal compatible with most gas detection systems and PLCs. The output signal is not affected by drastic temperature variations such as washdowns, defrost cycles, etc. SAFECELL checks the electrical viability of the electrochemical cell and drops signal to 0.5 mA when the cell is failed or missing.
- Specifications
-
Specifications of Ammonia Gas Detector:
Input Power: +24 VDC, 350 mA Detection Principle: Electrochemical Detection Method: Diffusion Gases Ammonia (NH3) Ranges 0/100 ppm (standard)
0/250 ppm
0/500 ppm
0/1000 ppm
Custom ranges available. Call for more informationOutput Signal: Linear 4-20 mA (max input impedance: 700 Ohms) Linearity: +/- 1% of full-scale Repeatability: +/- 1% of full-scale Response Time: T50 = less than 30 seconds
T90 = less than 60 secondsAccuracy: +/- 5% of value, but dependent on calibration gas
accuracy and time since last calibration A11Zero Drift: Less than 0.1% of full-scale per month, noncumulative Span Drift: Application dependent, but generally less than 3% per month Temperature Range: -50°F to +122°F (-46°C to +50°C) Humidity Range: 5% to 100% condensing Wiring Connections: 3 conductor, shielded, stranded, 20 AWG cable
(General Cable C2525A or equivalent) up to 1500 ftTerminal Block Plugs: (Field Wiring) 12-26 AWG, torque 4 lbs-in Enclosure: NEMA 3RX injection-molded, washdown-duty polycarbonate sensor housing with hinged lid and captive screw. For non-classified areas. Optional 316 18 GA, NEMA 3RX washdown-duty stainless steel housing with hinged lid and captive screw.
For non-classified areasDimensions: 7.5” high x 6.5” wide x 3.75” deep Weight: 2.15 lbs Certification: SGS listed to UL 61010-1, and CSA C22.2 No. 61010-1-12 Warranty: 2-years (including sensor element) - Downloads
-
Downloads: