Features
- Capable of measuring up to 8 kinds of gases
- Gas can be selected with key operation
- Direct digital readout
- Built‐in sampling pump
- Highly accurate measurement with CCD and Fourier analysis technology
- Data logging stores up to 100 readings
- Few consumable parts save on maintenance costs
Applications
- Measurement of fumigation gases,
PH3, SO2F2, CH3Br, HCN and EDN - Measurement of anaesthesia,
solvents, toxic gases and gas purity
FI-8000 Fumigation/Anaesthetic Gas Monitor Overview
Following on from the popularity of the FI-21, the FI-8000 fumigation/anaesthetic gas monitor has now been equipped with enhanced capability to detect new gases, and has been reduced in size.
The FI-8000 fumigation/anaesthetic gas monitor with IECEx / ATEX / IP-67 is the latest model from Riken in a long line of optical interferometers dating back to the 1930’s when Riken’s founder first developed the technology for methane detection to help prevent explosion accidents on oil tankers and in coal mines.
Gases Measured: This version of the FI-8000 fumigation/anaesthetic gas monitor has been setup to measure commonly used fumigants such as sulfuryl fluoride (SO2F2) / sulphuryl fluoride / vikane® / profume®, phosphine (PH3), methyl iodide (CH3I) / iodomethane / MEL, propylene oxide (CH3CHCH2O), hydrogen cyanide (HCN), and methyl bromide (CH3Br) / bromomethane.
The principal operation is the comparison of the gas’s optical refractive index, so there are no moving parts or sensor-drift issues. This makes the calibration remain very stable. The FI-8000 fumigation/anaesthetic gas monitor displays the vaporiser output concentration and does not require correction factors. This instrument measures the concentration of desflurane (suprane), sevoflurane, isoflurane (forane), and halothane as a percentage.
Applications: The FI-8000 fumigation/anaesthetic gas monitor is also used in many other applications, including anaesthesia, solvents, inert gases, toxic gases, and gas purity.
FI-8000 Fumigation/Anaesthetic Gas Monitor Specifications
| Sampling method | Suction type |
| Principle of detection | Interferometer Method |
| Detection range | Depend on the target gas. |
| Explosion-protected construction | Intrinsic safety |
| Explosion-proof class | IECEx : Ex ia IIC T4 Ga ATEX : II 1G Ex ia IIC T4 Ga |
| Ingress proof rating | IP67 |
| Approvals | IECEx, ATEX |
| Power source | Dry battery unit (AA alkaline battery 3pcs.) |
| Continuous operation |
Approx.18 hours [TYPE P] (new dry battery, 25ºC, without illumination) |
| Dimensions | Approx. 154(W) × 127(H) × 81(D) mm (projection portions excluded) |
| Weight | Approx. 1.1 kg [dry battery unit] |
| Operating temperature range | -20 to +50ºC (no sudden changes) |
| Operating humidity range | 0 to 95 %RH (no condensing) |
FI-8000 Startup
FI-8000 Downloading Data
FI-8000 Unit Configuration
FI-8000 Filter Maintenance
FI-8000 Changing Measurement Gas
Lithium Ion
Rechargeable Battery
Alkaline Battery Pack
Soda Lime (CO2) Scrubber
Calcium Chloride
(Moisture Absorber)
Water Trap
Junction Tubes
- Overview
-
FI-8000 Fumigation/Anaesthetic Gas Monitor Overview
Following on from the popularity of the FI-21, the FI-8000 fumigation/anaesthetic gas monitor has now been equipped with enhanced capability to detect new gases, and has been reduced in size.
The FI-8000 fumigation/anaesthetic gas monitor with IECEx / ATEX / IP-67 is the latest model from Riken in a long line of optical interferometers dating back to the 1930’s when Riken’s founder first developed the technology for methane detection to help prevent explosion accidents on oil tankers and in coal mines.
Gases Measured: This version of the FI-8000 fumigation/anaesthetic gas monitor has been setup to measure commonly used fumigants such as sulfuryl fluoride (SO2F2) / sulphuryl fluoride / vikane® / profume®, phosphine (PH3), methyl iodide (CH3I) / iodomethane / MEL, propylene oxide (CH3CHCH2O), hydrogen cyanide (HCN), and methyl bromide (CH3Br) / bromomethane.
The principal operation is the comparison of the gas’s optical refractive index, so there are no moving parts or sensor-drift issues. This makes the calibration remain very stable. The FI-8000 fumigation/anaesthetic gas monitor displays the vaporiser output concentration and does not require correction factors. This instrument measures the concentration of desflurane (suprane), sevoflurane, isoflurane (forane), and halothane as a percentage.
Applications: The FI-8000 fumigation/anaesthetic gas monitor is also used in many other applications, including anaesthesia, solvents, inert gases, toxic gases, and gas purity.
- Specifications
-
FI-8000 Fumigation/Anaesthetic Gas Monitor Specifications
Sampling method Suction type Principle of detection Interferometer Method Detection range Depend on the target gas. Explosion-protected construction Intrinsic safety Explosion-proof class IECEx : Ex ia IIC T4 Ga
ATEX : II 1G Ex ia IIC T4 GaIngress proof rating IP67 Approvals IECEx, ATEX Power source Dry battery unit (AA alkaline battery 3pcs.) Continuous operation Approx.18 hours [TYPE P] (new dry battery, 25ºC, without illumination)
Approx. 24 hours [TYPE A] (new dry battery, 25ºC, without illumination)Dimensions Approx. 154(W) × 127(H) × 81(D) mm (projection portions excluded) Weight Approx. 1.1 kg [dry battery unit] Operating temperature range -20 to +50ºC (no sudden changes) Operating humidity range 0 to 95 %RH (no condensing) - Downloads
- Videos
-
FI-8000 Startup
FI-8000 Downloading Data
FI-8000 Unit Configuration
FI-8000 Filter Maintenance
FI-8000 Changing Measurement Gas
- Accessories
-
Lithium Ion
Rechargeable Battery
Alkaline Battery Pack
Soda Lime (CO2) Scrubber
Calcium Chloride
(Moisture Absorber)
Water Trap
Junction Tubes
Enquire Now