Gas Detection Equipment Hire

Need reliable gas detection equipment for a long-term or short-term project, shutdown or emergency response?

Control Equipment offers a comprehensive range of fully calibrated portable gas detectors and gas monitoring instruments for hire, helping you protect your workforce without the cost of purchasing equipment. Whether you’re undertaking confined space entry, environmental monitoring, or hazardous area work, our flexible hire solutions provide the right instrument, ready to use, when you need it.

From single-shift confined-space entry to full mine-site shutdowns, our gas detector hire range covers single-gas, multi-gas (2–6 gases), PID, benzene-specific, formaldehyde, and laser methane detection instruments — each supplied fully calibrated and ready to deploy.

Every hire unit is supplied with a current calibration certificate and backed by expert technical support from Australia’s gas detection specialists.

Portable Personal Gas Detectors for Hire

Protect your workers with reliable portable personal gas detectors available for short or long-term hire from Control Equipment.

Ideal for confined space entry, maintenance shutdowns, construction, mining and industrial applications, our fully calibrated single and multi-gas detectors provide dependable monitoring of hazardous gases to help keep your team safe and compliant.  Every instrument is serviced, function-tested, and supplied ready for immediate use, with expert technical support to ensure you have the right gas detector for your application.

Personal Gas Detection – Multi Gas – Confined Space Monitors – GX-3R Smallest four gas monitor

GX-3R | SINGLE GAS CONFINED SPACE MONITOR

The GX-3R is the world’s smallest 4-gas monitor, weighing only 110 grams. It simultaneously monitors and displays LEL combustibles, O2, CO and H2S.

Product Features

  • Simultaneous detection of 4 gases LEL gas library, O2, H2S & CO
  • Dual audible alarm ports (95 db @ 30 cm)
  • 3 visual alarm LED’s
  • IP-68 Waterproof/dustproof design
  • Non-compliance indicator
  • Large capacity data logging standard
  • 25 hours of operation (Lithium-ion batteries)
  • Intrinsically safe, IECEx/ATEX approved
  • Compatible with SDM-3R dock station

Unit Specifications

Dimension & Weight Approx 55mm (H) x 64mm (W) x 26mm (D), approx 100g
Response Time Within 30 seconds (T90)
Sampling Method Diffusion sampling, hand aspirator or motorised pump optional
Operating Temp & Humidity -40°C to +60°C, 0 to 95% RH, non-condensing (splash resistant)
Power Source Lithium-ion battery
Continuous Operation 25 hours after a full 3-hour charge
Safety Rating Ex da ia IIC T4 Ga or EX ia IIC T4 Ga and EX da ia I MA or EX ia I Ma (IECEx)
Case Material Explosion-proof, dust- and water-resistant to IP-68 (2m, 1 h) approval. Drop height 7m

 

Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
All Combustible gases (Methane as standard) Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm

*Calibrated to Methane (CH4) as standard, can be calibrated to other explosive gases as requested

Hire Rates

Rates Accessories
Day:                $ 50.00

Week:            $ 150.00

Month:            $ 350.00

 

 Included

  • Battery charger
  • Carry case

Optional

  • Hand aspirator, hose & probe
  • Calibration adaptor
  • IR download kit

GX-3R Pro Smallest five gas Personal Gas Monitor

GX-3R PRO | 5-GAS PERSONAL GAS MONITOR

The GX-3R Pro is the world’s smallest 5-gas monitor, weighing only 129 grams and fitting in the palm of your hand. It simultaneously monitors and displays up to 5 different gases.

Product Features

  • Simultaneous detection of 5 gases – LEL gas library, O2, H2S, CO, SO2, CO2
  • (73 W x 65 H x 26 D mm), Approx 129g
  • Bluetooth communication
  • IP-68 Waterproof/dustproof design
  • 25 hours of operation
  • (Lithium-ion battery)
  • Intrinsically safe, IECEx/ATEX approved
  • Compatible with the SDM-3R docking station

Unit Specifications

Dimensions & Weight 85 mm × 190 mm × 40 mm, 500g
Sampling Time 0-0.4 ppm 30 minutes (1,800 sec.) | 0-1.0 ppm 15 minutes (900 sec.)
Sampling Method Sample drawing with built-in pump
Operating Temp & Humidity -10°C to +40°C, 0- 95% RH non-condensing
Power Source 4 ‘AA’ Alkaline dry cell batteries
Continuous Operation 12 hours (with no alarm or backlight, with alkaline batteries at 20°C)

 

Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Formaldehyde (HCHO) Photoelectric 0-0.4 ppm +10% of reading or +5% full scale N/A N/A
Photometry 0-1 ppm N/A N/A

Hire Rates

Rates Accessories
Day:                       $ 70.00

Week:                   $ 200.00

Month:                 $ 450.00

 

 Included

  • Battery charger
  • Carry case

 

Optional

  • Hand aspirator, hose & probe
  • Calibration adaptor
  • IR download kit

GX-8000 Four Gas Monitor for ShippingGX-8000 | PORTABLE MULTI-GAS MONITOR LEL/02/VOL

The GX-8000 is a rugged, reliable, portable gas detector. Its tough, waterproof design is based on years of gas detection design experience to ensure the instrument operates reliably, protecting workers and property in all kinds of harsh gas detection applications.

Product Features

  • Hydrogen purging applications
  • Monitor up to 100% volume of combustible gas in an inert atmosphere
  • Large digital and bar graph display with back light
  • Easy and simple operation
  • Intrinsic safe design IECEx
  • Water and dust resistant IP67
  • Data logging standard

Unit Specifications

Dimensions & Weight 150mm W x 80mm H x 130mm D, 1.1kg
Sampling Method Sample draw pump, minimum 0.75LPM
Operating Temp & Humidity -20°C to +50°C, 0- 95% RH non-condensing
Power Source Lithium-ion battery
Continuous Operation Greater than 12 hours
Safety Rating Ex ia IIC T4 Ga (IECEx KEM 10.0038)
Case Material Dust & water-resistant design IP-67

 

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1** Alarm 2**
Combustible (H2)* Catalytic Combustion 0-100% LEL Less than +5 LEL 5% LEL 10% LEL
Combustible (H2) Thermal Conductivity 0-100% Vol Less than +5 Vol% N/A N/A
Oxygen (O2) Electrochemical Cell 0-40% Vol Less than +0.7 Vol% 19.5% Vol 23.5% Vol

*Calibrated to Hydrogen (H2) as standard, can be calibrated to other explosive gases as requested

**Alarms can be disabled for Hydrogen purging application

Hire Rates

Rates Accessories
Day:                     $  90.00

Week:                  $ 320.00

Month:                 $ 760.00

 

 Included

  • Battery charger
  • Shoulder strap
  • 3m hose and probe
  • Carry Case

 Optional

  • IR download kit

GX-2012GT Portable Flammable Gas Monitor with Low PPM

GX-2012 | 5-GAS PERSONAL DETECTOR

Built around our high-quality micro-sensor technology, the GX-2012 is our smallest personal 5-sensor gas monitor with a built-in sample pump. Weighing only 350 grams, it has two operating modes: normal (for confined spaces) and bar hole.

Product Features

  • Monitors LEL, % Vol Methane, O2, CO and H2S
  • Auto-ranging display of % LEL and % volume
  • Internal sample drawing pump
  • Vibration, visual, and audible alarms
  • Quick charge (complete charge in 90 minutes)
  • High-impact protective rubber overmoulding
  • Up to 600 hours of data logging with alarm trends
  • Compatible with the SDM-2012 docking station

Unit Specifications

Dimensions & Weight Approx 14.3 cm x 7.1 cm x 4.3 cm (H x W x D), Weight is approx 350g
Response Time (T90) Within 30 seconds
Sampling Method Sample Draw
Operating Temp & Humidity -20°C to +50°C, 0 to 95% RH, non-condensing
Power Source Lithium-ion battery
Continuous Operation Li-ion battery: 10 hours
Safety Rating Ex ia IIC/IIB T4 Ga (IECEx DEK 11.0045)
Case Material High dust & water-resistant design IP-67

 

Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Combustible (CH4)* Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm

* Calibrated to Methane (CH4) as standard, can be calibrated to other explosive gases as requested

 

Hire Rates

Rates Accessories
Day:                       $ 70.00

Week:                   $ 200.00

Month:                 $ 450.00

 

 Included

  • Battery charger
  • Carry case
  • 3m hose and probe
  • Tapered rubber nozzle

 Optional

  • IR download kit

One to Six Gas Personal Monitor

GX-6000 | 1-6 GAS PERSONAL DETECTOR

The GX-6000 is a game-changer because it can simultaneously monitor up to 6 gases. Including the standard 4 confined space gases, which incorporate combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super-toxic sensors.

Product Features

  • Multi-gas detection 1 to 6 gases
  • Smart sensors – PID, EC, IR
  • High water and dust-proof level IP67
  • 24+ hours of operation
  • Compatible SDM-6000 docking station

Various approvals ATEX/IECEx/CE

Large capacity data logging standard

Library of 600 VOC

Unit Specifications

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Combustible (CH4)* Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm

 

Additional Sensors (Maximum 2)
Combustible (CH4) Infra-Red +5% of reading or +2% of full scale N/A N/A
Carbon Dioxide (CO2) Infra-Red 0-10% Vol +5% of reading or +2% of full scale 0.5% Vol 3.0% Vol
Carbon Dioxide (CO2) Infra-Red 0-10,000 ppm +5% of reading or +2% of full scale 5,000 ppm N/A
Sulphur Dioxide (SO2) Electrochemical Cell 0-100 ppm +10% of reading or +5% of full scale 2 ppm 5 ppm
Nitrogen Dioxide (NO2) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 3 ppm 5 ppm
Hydrogen Cyanide (HCN) Electrochemical Cell 0-30 ppm +10% of reading or +5% of full scale 5 ppm 10 ppm
Ammonia (NH3) Electrochemical Cell 0-400 ppm +10% of reading or +5% of full scale 25 ppm 35 ppm
Phosphine (PH3) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 0.3 ppm 1 ppm

*Calibrated to Methane (CH4) as standard; can be calibrated to other explosive gases as requested

Hire Rates

Rates Accessories
5 Gas

Day:                $ 100.00

Week:             $ 300.00

Month:            $ 740.00

6 Gas

Day:                $ 120.00

Week:             $ 320.00

Month:            $ 760.00

 

 Included

  • Battery charger
  • 3m hose and probe
  • Carry Case
  • Tapered rubber nozzle

Optional 

  • Charcoal filter (PID zero)
  • Soda Lime filter (CO2 zero)
  • IR download kit

One to Six Gas Personal Monitor

GX-6000 | ppb

The ppb-level sensor uses a 10.6 eV lamp and includes a built-in library of over 600 VOCs. It features multiple operating modes (normal, leak check, snap log, and bar hole) and automatically tracks data to parts-per-billion accuracy. The minimum detectable concentration is 1 ppb for concentrations below 5,000 ppb.

Product Features

  • Multi-gas detection 1 to 6 gases
  • Smart sensors – PID, EC, IR
  • High water and dust-proof level IP67
  • 24+ hours of operation
  • Compatible SDM-6000 docking station
  • Various approvals ATEX/IECEx/CE
  • Large capacity data logging standard
  • Library of 600 VOC

Unit Specifications

Dimensions & Weight 68mm x 200mm x 52mm, 400g
Response Time (T90) Within 30 seconds
Sampling Method Sample draw pump, flow rate 0.45 LPM, 15-meter sample range
Operating Temp & Humidity -20°C to +50°C, 0- 95% RH non-condensing
Power Source Lithium-ion battery
Continuous Operation 14 hours on lithium-ion battery pack
Safety Rating Ex ia IIB T4/T3 Ga (IECEx PRE 15.0011)
Case Material Dust & water-resistant design IP-67

 

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
VOC’s Photoionization (PID) 0.1-50 ppm +10% of reading +1 digit 5,000 ppb 10,000 ppb

Hire Rates

Rates Accessories
Day:                $ 150.00

Week:             $ 370.00

Month:            $ 850.00

 

 Included

  • Battery charger
  • 3m hose and probe
  • Charcoal filter
  • Carry Case
  • Tapered rubber nozzle

Optional 

  • IR download kit

Specialised Gas Detectors for Hire

When standard gas detectors aren’t enough, Control Equipment offers a range of specialised gas detectors for hire to meet the demands of complex monitoring applications.

From toxic and exotic gases to refrigerants, volatile organic compounds (VOCs) and other application-specific hazards, our fully calibrated instruments deliver accurate, reliable detection for industrial hygiene, environmental monitoring, research, manufacturing and hazardous work environments. With flexible hire options and expert technical support, we’ll help you select the right specialised gas detector for your project.

One to Six Gas Personal Monitor

GX-6000 | BENZENE PERSONAL DETECTOR

The GX-6000 Benzene personal detector is a lightweight, easy-to-carry monitor. Using filtering tubes and the tube holder, the GX-6000 can specifically monitor Benzene over a range of 0–50 ppm (with a resolution as low as 0.01 ppm) by filtering out all other VOCs.

Product Features

  • Benzene-specific measurement
  • 0.01 – 50 ppm with 10.0 eV PID lamp and pre-filter tube
  • Benzene select mode takes timed samples using a pre-filter tube
  • Long breakthrough times for benzene filter tubes
  • 10.0 eV Selective PID sensor, 0 – 100 ppm VOC range
  • Library of over 300 VOC’s, including BTEX
  • Dual channel PIDs utilising both 10.0 & 10.6 PID sensors
  • 2 smart sensor slots auto-recognise PID, IR, and toxic sensors
  • Dust & Water resistant IP-67 design
  • Interchangeable battery packs Li-ion / alkaline
  • Operates up to 14 hours on Li-ion battery, fully recharges in 3 hours
  • Humidity resistant
  • Easily switched VOC target gas – favourite list of 30 VOC’s

Unit Specifications

Dimensions & Weight 68mm x 200mm x 52mm, 600g
Response Time (T90) Within 30 seconds
Sampling Method Sample draw pump, flow rate 0.45 LPM 15-meter sample range
Operating Temp & Humidity -20°C to +50°C, 0- 95% RH non-condensing
Power Source Lithium-ion battery
Continuous Operation 14 hours on lithium-ion battery pack
Safety Rating Ex ia IIB T4/T3 Ga (IECEx PRE 15.0011)
Case Material Dust & water-resistant design IP-67

 

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Benzene Photoionization (PID) 0.1-50 ppm +10% of reading +1 digit N/A N/A

Hire Rates

Rates Accessories
Day:                     $ 200.00

Week:                  $ 480.00

Month:                 $ 970.00

 

 Included

  • Battery charger
  • Benzene tube holder
  • 3m hose and probe
  • Carry Case

 Optional

  • IR download kit
  • Pre-filters must be purchased
    5-pack $100 and 10-pack $170

FP-31 Portable Formaldehyde Gas DetectorFP-31 |  FORMALDEHYDE GAS DETECTOR

This Portable Formaldehyde Gas Detector is a precision gas analyser that measures gases in the ppm range using photoelectric photometry with chlorimetric detection tabs. This device is highly sensitive and can detect very low levels of formaldehyde to ensure safe breathing levels.

Product Features

  • Easy-to-read LCD display
  • Easy operation
  • Self diagnosis
  • Less interference with other gases
  • Measures 0.005 pm
  • No warm-up time
  • Available for download to PC
  • Resolutions 0.005 ppm
  • Read-out of the sample in 30 minutes

Unit Specifications

Dimension & Weight 73 W x 65 H x 26 D mm), 129g (with rubber boot)
Response Time Within 30 seconds (T90)
Sampling Method Diffusion sampling standard/hand aspirator or motorised pump optional
Operating Temp & Humidity -20C to +50C, to 90% RH, non-condensing
Power Source Lithium-ion battery
Continuous Operation 25 hours after a full 3-hour charge
Safety Rating Ex da ia IIC T4 Ga or EX ia IIC T4 Ga and EX da ia I MA or EX ia I Ma (IECEx)
Case Material Explosion-proof, dust- and water-resistant to IP-68 (2m, 1 h) approval. Drop height 7m

 

Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
All Combustible gases (Methane as standard) Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm
Additional Sensors (Maximum 1)
Carbon Dioxide (CO2) Infra-Red 0-10% Vol +5% of reading or +2% of full scale 0.5% Vol 3.0% Vol
Carbon Dioxide (CO2) Infra-Red 0-10,000 ppm +5% of reading or +2% of full scale 5,000 ppm N/A
Sulphur Dioxide (SO2) Electrochemical Cell 0-100 ppm +10% of reading or +5% of full scale 2 ppm 5 ppm
Nitrogen Dioxide (NO2) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 3 ppm 5 ppm
Hydrogen Cyanide (HCN) Electrochemical Cell 0-30 ppm +10% of reading or +5% of full scale 5 ppm 10 ppm
Ammonia (NH3) Electrochemical Cell 0-400 ppm +10% of reading or +5% of full scale 25 ppm 35 ppm
Phosphine (PH3) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 0.3 ppm 1 ppm

*Calibrated to Methane (CH4) as standard, can be calibrated to other explosive gases as requested

Hire Rates

Rates Accessories
Day:                $ 125.00

Week:               $ 380.00

Month:            $ 820.00

 

 Included

  • Spare alkaline batteries
  • Carry case

 Optional

  • IR downloading kit
  • Detection TABS
    ($30.00 5 pk /$50.00 10 pk/ $95.00 20 pk)

Laser Methane Smart (LMS) Gas Detector - Control Equipment, Riken Keiki

LMS SMART | COMPACT PORTABLE METHANE GAS DETECTOR

The Laser Methane system is a cutting-edge solution for efficient leak control during routine inspections. With its ability to detect methane leaks from up to 30m away, workers can assess multiple potential leaks from a safe distance. The latest model includes a camera and communication device that can automatically send data to a cloud server.

Product Features

  • Searching range: 30m – keeps operators away from harm
  • Green guide laser light – gives clear visibility of the searching point even under bright sunshine
  • 0.1-second response time – enables swift searching for gas leaks.
  • Laser co-axis digital camera – records photos of inspection points. Storing data on a cloud server – secures measurement data and the photos via android or IOS devices
  • Point and shoot technology
  • Certified for explosion protection in IECEx and ATEX

Unit Specifications

Model LM2B3E-SBA (Bluetooth-enabled data storage via communication with the cloud
Detection gas Methane (CH4)
Detection range 1 ~ 50000 ppm×m
Detection accuracy ± 10 % (100 ~ 1000 ppm×m)
Detection response time 0.1 second
Detection distance 1.64 – 98 feet (0.5 — 30 m)
Laser safety:
Measurement light Class 1
Guide Light Class 3R
Dustproof, Waterproof IP54
Explosion safety 3 (1) G Ex ic [op-is Ga] A T4 Gc
Wireless Radio Law EU, China, Korea, Japan, U.S, Canada, Taiwan, Russia
Storage Data Micro SD Card
Transfer Data Send to Cloud Server via Android or IOS Devices
Operating temperature 1.4 to 122° F (-17 to +50 °C)
Overall dimensions 2 × 8 × 2 in (55 × 200 × 53 mm) (wxdxh)
Weight 1 lb (500 g), including 4 batteries
Power supply Commercial AA batteries (4 pcs)
Operation Time >3.5 hours @25

Hire Rates

Rates
Week      $ 970.00

Month  $ 2,950.00 

 

Testo 340 – Flue Gas Analyser

TESTO 340 DIESEL KIT | COMPACT POTABLE METHANE GAS DETECTOR

The testo 340 is the right tool for a wide range of emission measurements. The compact design and reliable technology make it the ideal measuring instrument for commissioning, service, and maintenance work, as well as for test measurements on industrial burners, stationary industrial engines, gas turbines, and thermal processes.

The testo 340 Diesel Kit includes: testo 340 Flue Gas Analyser equipped with O2, CO, NO, NO2 (NOX) readings, and an engine probe with a thermocouple.

Product Features

  • Measurement range extension for a single dilution slot or optional for all sensors
  • Pressure-/ flow-measurement standard in every testo 340
  • Automatic flow-controlled gas pump
  • 18 standard fuels and an additional 10 user-defined fuels
  • Fuel data is calculated using the software easyEmission
  • Direct measurement of 4 gases simultaneously
  • CO range extension 50,000 PPM
  • Automatic sensor protection range extension
  • Smartphone App compatible

Included Accessories

  • testo 340 instrument
  • Rechargeable battery
  • Calibration protocol & carry strap
  • Transport case
  • Engine probe with pre-filter 4m hose, 335m shaft
  • Integrated flow/differential pressure measurement
  • Switching power supply 6,3VDC, 200mA
  • O2 sensor (0-25 Vol.%)
  • CO sensor (0-10,000ppm)
  • NO sensor (0-3,000ppm)
  • NO2 sensor (0-500ppm)
  • Dilution over all sensors
  • Thermocouple Type K
  • 4m cable, incl. heat protection, seal ring and compression fitting

Testo 340 Flue Gas Analyser Diesel Kit

Hire Rates

Rates
Week      $ 970.00

Month  $ 2,950.00 

 

EAGLE II Portable Survey Gas DetectorEAGLE II – PORTABLE SURVEY GAS DETECTOR

The popular Eagle II portable gas detector is a powerful instrument that offers more than just the standard confined-space protection for LEL, O2, H2S, and CO units.

Product Features

  • PPM/LEL hydrocarbon detection
  • Powerful long-life pump
  • Low-flow pump shut-off and alarm
  • Methane elimination for environmental use
  • Data logging standard
  • IrDA communications port
  • External probe with hydrophobic filter

Unit Specifications

Dimensions & Weight 240mm x 133mm x 149mm, 1.7kg
Response Time (T90) Within 30 seconds
Sampling Method Powerful long-life pump. Flow rate approximately 900 ml / m
Operating Temp & Humidity -20°C to +50°C, 0- 95% RH non-condensing
Power Source 4 alkaline or NiMh, size C batteries
Continuous Operation 16 hours using alkaline batteries / 20 hours using NiMh rechargeable batteries
Case Material Dust & water-resistant design IP-64

 

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Combustible (CH4)* Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Combustible (CH4)** Catalytic Combustion 0-50,000 ppm +50% of reading or +5% full scale 2500 ppm 5,000 ppm
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm
Standard Sensors
Carbon Dioxide (CO2) Infra-Red 0-60% Vol +5% of reading or +2% full scale 0.5% Vol 3.0% Vol

*Calibrated to (CH4) as standard; can be calibrated to other explosive gases as requested

**Unit can switch between ppm mode and LEL mode by pressing range button

Hire Rates

Rates Accessories
Day:                $  90.00

Week:             $ 320.00

Month:            $ 760.00

 

 Included

  • Shoulder strap
  • Alkaline batteries
  • 1.5m hose and probe
  • Carry case

Optional

  • Dilution fitting (50/50)
  • IR download kit
  • Rechargeable batteries option

Gas Detector Accessories for Hire

Bump/Calibration Station – SDM-3R for GX-3R and GX-3R Pro

SDM-3R | CALIBRATION STATION

  • Stand-alone station (no PC required)
  • Compatible with both GX-3R and GX-3R Pro
  • Automatically charges, performs bump tests, and/or calibrates
  • Saves bump/cal data

SEM-2012 | CALIBRATION STATION

  • Stand-alone station (no PC required)
  • Compatible with both GX-2012
  • Automatically charges, performs bump tests, and/or calibrates
  • Saves bump/cal data

Personal Gas Detection Calibrator - SDM-6000

SDM-6000 | CALIBRATION STATION

  • Stand-alone station (no PC required)
  • Compatible with both GX-6000
  • Automatically charges, performs bump tests, and/or calibrates
  • Saves bump/cal data

Calibration Station Hire Rates

Rates
Day:                $   50.00

Week:             $ 150.00

Month:            $ 350.00 

RP-3R pump for the GX-3R Smallest four gas monitor

RP-3R | RP-3R PRO | CLIP-ON SAMPLE DRAWING PUMP

Compact, battery-powered, motorised sample-drawing pump that attaches to the GX-3R or GX-3R Pro, switching them from diffusion to sample-drawing operation. Together, the RP-3R pump and the GX-3R/GX-3R Pro gas monitor are the complete solution for confined-space entry.

Product Features

  • Attaches to the GX-3R or GX-3R Pro in seconds
  • Compact and lightweight
  • 10 hours of operation in normal mode (higher flow mode)
  • 16 hours of operation in lower-flow mode (ECO mode)
  • Audible and visual alarms for low flow and low battery conditions
  • Pilot light to confirm operation
  • Quick disconnect fitting for hose connection
  • Hoses available in 3m lengths
  • Includes 10cm tapered red rubber nozzle, AA alkaline battery, and hydrophobic filters
  • Rugged design

Unit Specifications

Flow Rate Higher flow mode: 0.5 l/m. Lower flow mode (ECO mode): 0.35 l/m
Alarm Display Low flow alarm: Flow blinks YELLOW. Low battery alarm: Power LED blinks GREEN
Power Supply 1 AA alkaline battery
Continuous Operation Higher flow mode: 10 hours. Lower flow mode (ECO mode): 16 hours
Operating temperature -20° C to + 50° C (no sudden change)
Operating humidity range 95% RH or less (without condensation)
External Dimensions 8.2cm (W) x 9.6cm (H) x 2.9cm (D) (body only)
Weight 130g
Explosion Proof Intrinsically safe construction (Exia II CT 4 Ga) pending
Standard Accessories 10cm tapered red rubber nozzle, AA alkaline battery, & hydrophobic filters
Optional Accessories 25 – 250cm hose, 25cm probe with dust filter

Hire Rates

Rates
Day:                $ 50.00

Week:            $ 150.00

Month:            $ 350.00

 

Get a Same Day Quote

All our Hire Equipment is:

  • Customised set-up to match customer requirements
  • Available for short or long-term hire
  • Supplied with full up-to-date calibration certificate

Download our Hire Form
Gas Detection Equipment Hire Catalogue

Frequently Asked Questions

Are hire gas detectors calibrated before they are supplied?

Yes. Every gas detector is fully tested, serviced and supplied with a current calibration certificate before it leaves our workshop. This ensures your hire equipment is ready for immediate use and provides accurate, reliable gas monitoring from the moment it arrives on site.

Can you deliver gas detection equipment anywhere in Australia?

Yes. We supply gas detection equipment for hire Australia-wide. Instruments can be shipped directly to your site, and unlike many hire companies, freight transit time is not charged as part of your hire period, helping you maximise the time you have the equipment on site.

Why hire a gas detector instead of buying one?

Hiring is ideal for short-term projects, shutdowns, confined-space work, emergency response, compliance monitoring, or when you need specialist equipment that isn’t used regularly. Gas detector hire eliminates the costs of purchasing, calibration, servicing and ongoing maintenance while giving you access to the latest technology whenever you need it. It’s also an excellent way to trial equipment before making a purchase.

How do I know what type of gas detector should I hire?

The right gas detector depends on your application and the gases you need to monitor. We offer portable single-gas detectors, multi-gas detectors, PID (VOC) detectors, confined space gas monitors, leak detectors, and specialist instruments for fumigation and environmental monitoring. If you’re unsure which instrument is suitable, our technical team can recommend the best gas detection equipment for your project.

Back to Hire Page

View Industrial Hygiene

View Fumigation Monitors

Can’t find what you’re looking for?

If you are not sure which of our instruments is best suited to your application or just can’t see what you are looking for, call us Toll-free: +1800 174 536. 

Or make an enquiry below, and one of our team members will call you ASAP to discuss your project and equipment needs.

Enquire about our gas detection equipment hire today

Please provide a contact email and/or phone number: