Fumigation Monitoring Equipment Hire

Control Equipment offers specialised fumigation gas monitoring equipment for hire to help ensure the safe and effective use of fumigants across agriculture, logistics, shipping and quarantine applications.

Our fully calibrated instruments provide accurate detection of fumigation gases such as phosphine, methyl bromide and sulfuryl fluoride, supporting compliance with workplace safety requirements while protecting workers and the surrounding environment. With flexible hire options, expert advice and equipment ready for immediate deployment, we can provide the right monitoring solution for your fumigation project.

 

Trusted by fumigation contractors, storage operators, traders and compliance officers, our gas monitoring equipment gives you the confidence that correct fumigation concentrations are achieved and that spaces are safe to re-enter.

Clearance | Low Concentration Range

Suitable for gas detection during the post-fumigation ventilation phase

Our fumigation gas detection monitoring equipment includes the GX-3R Pro and GX-6000, which are ideal for personal safety, worker breathing-zone monitoring, confined-space entry, leak detection, and day-to-day fumigation work.

GX-3R Pro Smallest five gas Personal Gas Monitor

GX-3R PRO | 5-GAS PERSONAL GAS MONITOR

The GX-3R Pro is the world’s smallest 5-gas monitor, weighing only 129 grams and fitting in the palm of your hand. It simultaneously monitors and displays up to 5 different gases.

Product Features

  • Simultaneous detection of 5 gases – LEL gas library, O2, H2S, CO, SO2, CO2
  • (73 W x 65 H x 26 D mm), Approx 129g
  • Bluetooth communication
  • IP-68 Waterproof/dustproof design
  • 25 hours of operation
  • (Lithium-ion battery)
  • Intrinsically safe, IECEx/ATEX approved
  • Compatible with the SDM-3R docking station

Unit Specifications

Dimensions & Weight 85 mm × 190 mm × 40 mm, 500g
Sampling Time 0-0.4 ppm 30 minutes (1,800 sec.) | 0-1.0 ppm 15 minutes (900 sec.)
Sampling Method Sample drawing with built-in pump
Operating Temp & Humidity -10°C to +40°C, 0- 95% RH non-condensing
Power Source 4 ‘AA’ Alkaline dry cell batteries
Continuous Operation 12 hours (with no alarm or backlight, with alkaline batteries at 20°C)

 

Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Formaldehyde (HCHO) Photoelectric 0-0.4 ppm +10% of reading or +5% full scale N/A N/A
Photometry 0-1 ppm N/A N/A

Hire Rates

Rates Accessories
Day:                       $ 70.00

Week:                   $ 200.00

Month:                 $ 450.00

 

 Included

  • Battery charger
  • Carry case

 

Optional

  • Hand aspirator, hose & probe
  • Calibration adaptor
  • IR download kit

One to Six Gas Personal Monitor

GX-6000 | 1-6 GAS PERSONAL DETECTOR

The GX-6000 is a game-changer because it can simultaneously monitor up to 6 gases. Including the standard 4 confined space gases, which incorporate combustibles, O2, CO, & H2S, the GX-6000 has 2 additional smart channels that accept PID, IR or super-toxic sensors.

Product Features

  • Multi-gas detection 1 to 6 gases
  • Smart sensors – PID, EC, IR
  • High water and dust-proof level IP67
  • 24+ hours of operation
  • Compatible SDM-6000 docking station

Various approvals ATEX/IECEx/CE

Large capacity data logging standard

Library of 600 VOC

Unit Specifications

Standard Sensors
Gas Detection Principle Range Accuracy Alarm 1 Alarm 2
Combustible (CH4)* Catalytic Combustion 0-100% LEL +5% of reading or +2% full scale 5% LEL 10% LEL
Oxygen (O2) Electrochemical Cell 0-25% Vol +0.5% 19.5% Vol 23.5% Vol
Hydrogen Sulphide (H2S) Electrochemical Cell 0-100.0 ppm +5% of reading or +2 ppm 10 ppm 15 ppm
Carbon Monoxide (CO) Electrochemical Cell 0-500 ppm +5% of reading or +5 ppm 30 ppm 60 ppm

 

Additional Sensors (Maximum 2)
Combustible (CH4) Infra-Red +5% of reading or +2% of full scale N/A N/A
Carbon Dioxide (CO2) Infra-Red 0-10% Vol +5% of reading or +2% of full scale 0.5% Vol 3.0% Vol
Carbon Dioxide (CO2) Infra-Red 0-10,000 ppm +5% of reading or +2% of full scale 5,000 ppm N/A
Sulphur Dioxide (SO2) Electrochemical Cell 0-100 ppm +10% of reading or +5% of full scale 2 ppm 5 ppm
Nitrogen Dioxide (NO2) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 3 ppm 5 ppm
Hydrogen Cyanide (HCN) Electrochemical Cell 0-30 ppm +10% of reading or +5% of full scale 5 ppm 10 ppm
Ammonia (NH3) Electrochemical Cell 0-400 ppm +10% of reading or +5% of full scale 25 ppm 35 ppm
Phosphine (PH3) Electrochemical Cell 0-20 ppm +10% of reading or +5% of full scale 0.3 ppm 1 ppm

*Calibrated to Methane (CH4) as standard; can be calibrated to other explosive gases as requested

Hire Rates

Rates Accessories
5 Gas

Day:                $ 100.00

Week:             $ 300.00

Month:            $ 740.00

6 Gas

Day:                $ 120.00

Week:             $ 320.00

Month:            $ 760.00

 

 Included

  • Battery charger
  • 3m hose and probe
  • Carry Case
  • Tapered rubber nozzle

Optional 

  • Charcoal filter (PID zero)
  • Soda Lime filter (CO2 zero)
  • IR download kit

Bump/Calibration Station – SDM-3R for GX-3R and GX-3R Pro

SDM-3R | CALIBRATION STATION

  • Stand-alone station (no PC required)
  • Compatible with both GX-3R and GX-3R Pro
  • Automatically charges, performs bump tests, and/or calibrates
  • Saves bump/cal data

Personal Gas Detection Calibrator - SDM-6000

SDM-6000 | CALIBRATION STATION

  • Stand-alone station (no PC required)
  • Compatible with both GX-6000
  • Automatically charges, performs bump tests, and/or calibrates
  • Saves bump/cal data

Calibration Station Hire Rates

Rates
Day:                $   50.00

Week:             $ 150.00

Month:            $ 350.00 

RP-3R pump for the GX-3R Smallest four gas monitor

RP-3R PRO | CLIP-ON SAMPLE DRAWING PUMP

Compact, battery-powered, motorised sample-drawing pump that attaches to the GX-3R Pro, switching it from diffusion to sample-drawing operation. Together, the RP-3R pump and the GX-3R Pro gas monitor are the complete solution for confined-space entry.

Product Features

  • Attaches to the GX-3R or GX-3R Pro in seconds
  • Compact and lightweight
  • 10 hours of operation in normal mode (higher flow mode)
  • 16 hours of operation in lower-flow mode (ECO mode)
  • Audible and visual alarms for low flow and low battery conditions
  • Pilot light to confirm operation
  • Quick disconnect fitting for hose connection
  • Hoses available in 3m lengths
  • Includes 10cm tapered red rubber nozzle, AA alkaline battery, and hydrophobic filters
  • Rugged design

Unit Specifications

Flow Rate Higher flow mode: 0.5 l/m. Lower flow mode (ECO mode): 0.35 l/m
Alarm Display Low flow alarm: Flow blinks YELLOW. Low battery alarm: Power LED blinks GREEN
Power Supply 1 AA alkaline battery
Continuous Operation Higher flow mode: 10 hours. Lower flow mode (ECO mode): 16 hours
Operating temperature -20° C to + 50° C (no sudden change)
Operating humidity range 95% RH or less (without condensation)
External Dimensions 8.2cm (W) x 9.6cm (H) x 2.9cm (D) (body only)
Weight 130g
Explosion Proof Intrinsically safe construction (Exia II CT 4 Ga) pending
Standard Accessories 10cm tapered red rubber nozzle, AA alkaline battery, & hydrophobic filters
Optional Accessories 25 – 250cm hose, 25cm probe with dust filter

Hire Rates

Rates
Day:                $ 50.00

Week:            $ 150.00

Month:            $ 350.00

 

Dosing | High Concentration Range

Suitable for gas detection and monitoring during active fumigation/bug kill phase

The FI-8000 and FumiMate are purpose-built fumigation monitoring instruments that provide contractors, storage operators, traders and compliance officers with real-time data for continuous remote gas monitoring.  These instruments provide high-level gas detection during active fumigation, continuous real-time remote monitoring, and assurance that spaces are safe to re-enter afterwards.

Ensure safe, compliant, and effective fumigation operations with our range of purpose-built gas detection and monitoring equipment.

FI-8000 | FUMIGATION MONITOR

The FI-8000 fumigation monitor is calibrated for five (5) selectable gas readings on the digital display. This device is a precision gas analyser designed to measure the % volume concentration of commonly used gases during fumigation.

Product Features

  • Capable of measuring different kinds of fumigation gases
  • Easy-to-read wide LCD display
  • Built-in sample pump
  • Optional lithium-ion battery pack for over 18 hours of continuous use)
  • International certifications IECEx/ ATEX/IP-67
  • Lightweight at only approx. 1.2 kg
  • Data logging stores up to 100 readings

Unit Specifications

Dimensions & Weight 150mm W x 80mm H x 130mm D, 1.1kg
Sampling Method Automatic draw-in by built-in pump
Operating Temp & Humidity -20°C to +50°C, 0- 95% RH non-condensing
Power Source Lithium-ion battery pack 18+ hours
Safety Rating Ex ia IIC T4 Ga (IECEx PRE 14.0061)
Case Material Dust & water-resistant design IP-67

 

Standard Sensors
Gas Detection Principle Range Accuracy
Methyl Bromide (CH3Br)  

Optical Interferometric

 0-200 g/m3  

+3% of reading
Sulfuryl Fluoride (SO2F2) 0-5% Vol
Phosphine (PH3) 0-200 g/m3
Hydrogen Cyanide (HCN) 0-50 g/m3
Cyanogen (C2N2) 0-200 g/m3
Methyl Iodide (CH3I) 0-50 g/m3
Propylene Oxide (PO) 0-10% Vol

Hire Rates

Rates Accessories
Day        $120.00

Week     $300.00

Month   $780.00

 

 Included

  • Fumigation filters & tubes
  • 1 metre sampling hose
  • Additional filter media
  • Carry case
  • Lithium-ion battery pack
  • Battery charger

 Optional

  • IR download kit
  • Filter holder

 

FUMIGATION MATE | FOUR-GAS 3-CHANNEL FUMIGATION GAS MONITORFumigation Mate Left Side

The Fumigation Mate is a fumigant monitoring instrument with a powerful, user-friendly integrated fumigation job management system. Providing secure measurement, collection, processing and reporting of all required fumigation data.

Product Features

  • Measures and monitors four fumigation gases
  • Complete job management system & reporting
  • Measure 1, 2, or 3 sample ports consecutively
  • Manage multiple jobs in run/suspend mode (up to 99) or a single job running continuously
  • Email finalised job data report to nominated recipients
  • Save all job data electronically
  • Built-in sample pump
  • Continuous operation 25+ hours on battery
  • Bluetooth and WiFi enabled
  • Lightweight and portable
  • GPS location

Unit Specifications

Detection Principle Optical Interferometric
Sampling Method Sample-draw by internal pump
Sample Inputs 1-3 (operator selectable)
Job Management Integrated FumiNav management system collects data without operator input
Job Monitoring Continuous or multi-job handling (up to 99)
Job Reporting Data is electronically reported via transmission on job completion
Display 200mm (8”) touchscreen
Filters Refillable Soda Lime CO2 filter supplied as standard
Power Supply Rechargeable battery for 25+ hours operation

Continuous operation when connected to 85 – 264 VAC 50/60 HZ
Environmental 0°C ~ +50°C; 0-95% RH (non condensing)
Enclosure Polypropylene
Dimensions W 417mm  D 221mm  H 334mm

 

Gases Measured
Methyl Bromide (CH3Br) in air 0-200 g/m3
Sulfuryl Fluoride (SO2F2) in air 0-50g/m3
Phosphine (PH3) in air 0-200 g/m3
Cyanogen (C2N2) in air 0-50g/m3
Cyanogen (C2N2) in air 0-300g/m3

Hire Rates

Rates Accessories
Month:      $ 1,200.00

 

 Included

  • Instruction Manual
  • 240v Charger
  • Additional Filter Chamber

Get a Same Day Quote

All our Hire Equipment is:

  • Customised set-up to match customer requirements
  • Available for short or long-term hire
  • Supplied with full up-to-date calibration certificate

Download our Hire Form
Fumigation Monitoring Equipment Hire Catalogue

Can’t find what you’re looking for?

If you are not sure which of our instruments are best suited to your application or just can’t see what you are looking for call us Toll Free: +1800 174 536. Or make an enquiry below and one of our team will call you asap to discuss your project and equipment needs.

Enquire about our fumigation monitoring hire equipment today

Please provide a contact email and/or phone number: